BARCO NV Bill Beck - the Barco laser guy - is on his way to CinemaCon 2015. Every day, he'll share with you insights and thoughts on laser projection. Join us on his journey and discover how laser projection is the biggest thing cinema has seen since the start of digitization. CinemaCon 2015 will go down in history as 'the laser year'!
Today, CinemaCon 2015 finally kicks off. I'm looking forward to seeing what innovations are demonstrated and presented. Not only on the show floor, but also in the hidden demo rooms in the back on the second floor. Barco will be showing a developmental 18,000 lm laser retrofit setup and of course, our new DP4K-45L will be in the booth on the show floor. I know the feedback will be positive.
Bigger, better, brighter - premium 3D
One of the most important capabilities enabled by laser illumination is the ability to project bigger, better and brighter 3D images than can be achieved with a single or even dual xenon-projector system. Barco's highly engineering laser illumination more than doubles how much light can be transmitted through a digital projector, making it the ideal solution for brighter 3D - making laser 3D the premium theatrical experience originally intended.
The problem
All first generation 3D systems were aftermarket 'bolt-on' approaches and all cut the brightness of 3D by 75-85% or more and this, with a fresh lamp. Some systems are down more than 90% with a depleted Xenon lamp. This brightness cut necessitated the installation of high gain screens, polarization recovery systems ('light doublers') and in extreme cases, 'dual-stacked projectors, each with their own 6.5-7kW lamps to change, match and adjust.
Barco's DP4K-L family of high brightness laser projectors addresses this problem head on, and solves it beautifully, without forcing exhibitors into any specific 3D technology. This, integrated, single projector laser system brings unsurpassed brightness, image quality - flexibility and simplicity, solving all the major drawbacks of current 3D systems.
- More than double the average brightness of the brightest Xenon projector
- 30,000 hour light source lifetime at full power, outperforming Xenon by more than a factor 100
- Supports all major types of 3D
- Integrated Barco Laser3D - 6P color separation system with no ghosting
- Single projector operating simplicity
- Full 4K image sharpness and high contrast
- Macro-switchable from 2D to 3D and back
The Barco laser projector family: all kinds of 3D for any size screen
The Barco laser projection system is cinema-optimized, providing a high level of capability and flexibility. It addresses a very wide range of applications. Deployable from small screening rooms to premium large format (PLF) auditoriums. The output of each model can be electronically adjusted or selected via presets from 100% down to 25% brightness, with corresponding reductions in wall plug power consumption.
The DP4K-L family of cinema laser projectors can be used with any of the major aftermarket 3D systems, Polarized/Circular; Polarized/Linear; and active glasses. The efficiencies (%) of each system are the same as when used with Xenon, but the projected light output is double that of corresponding Xenon projectors. This, combined with simple, accurate 3D/2D transitions, make the DP4K-L line the most flexible and capable premium 3D platform on the market. But there is more…
Barco Laser 3D - integrated, single projector '6 primary' color 3D
Each model in the table above, comes with a Barco exclusive. Its laser engine is comprised of two sets of Red, Green and Blue (RGB) primaries, each one spectrally offset from the other. The left eye and right eye RGB laser primaries of this engine can be electronically switched, providing buttery smooth 3D without the 'dark time' inserted for filter-wheel Xenon color 3D. This is the beauty of a controllable light laser source.
The Barco Laser 3D 6P system requires no additional hardware or special screen. It is more than twice as efficient as any other single projector, lamp-based color 3D. It starts with twice the brightness and stays there. Because the laser engine produces only the RGB primaries required, there is not filtering required in the projector. As the left and right eye primaries are only powered when required, the projector consumes only half the power in color 3D mode, reducing the power bill and extending laser lifetime.
A single flagship DP4K-60L can light up a 24 meter (75 foot) 1.8 gain white screen at 7fL and a 53 foot (17 meter) screen at 14fL, opening up nearly all the world's screens to consistently bright, laser-sharp, high contrast 3D.
Premium 3D image quality
Brightness is the key to premium 3D image quality and laser is the key to 3D brightness - to increase it and keep it constant and uniform for the life of the projector. In addition to brighter 3D, the DP4K-L family has higher 4K contrast than Xenon 4K projectors. Typical contrast values of 2,500:1 exceed the DCI spec and provide noticeably better blacks and a wider dynamic range in 3D.
In addition to higher and more consistent brightness, the DP4K-L family brings several additional benefits to Premium 3D. Barco Laser 3D glasses have very high transmission (>92%) and all the power from each primary set is in the passband of its respective glasses lens. No filtering in the projector is required. This is what makes Laser 6P so efficient. Furthermore, as the primaries are narrow band and widely separated, 3D ghosting is completely eliminated, achieving stereo contrast beyond 500:1, more than double that of most other 3D systems.
The near perfect brightness uniformity produced by the integrated laser engine minimizes the center to corner roll-off that comes with any gain screen. This is especially important for high gain screen applications. With corner illumination near equal to center brightness, the corner illumination of the gain screen is maximized, giving great brightness to every seat in the house.
Finally, the crisp images that are produced by a single projector system combined with highly saturated laser color bring 3D image quality to a bold new level.
This is where my road trip ends. I'm checking in to Caesar's Palace and I'm more than ready for 'the year of the laser'. Come meet up in person at the show or feel free to contact me at: bill.beck@barco.com.
Greetings from CinemaCon 2015 - where Barco launches the future of premium cinema projection,
Bill Beck, The Laser Guy
|
distributed by
|
