In the next three articles we'll share some of the Frequently Asked Questions (FAQ) we get and their answers. We start off with: How to get the laser projector into my booth?


Given the importance of cooling and the impact it has on brightness and lifetime of laser light sources, the projectors have a relatively large(r)cooling component. For Barco's RGB laser projectors these are called 'chillers': a closed circuit of cooling liquid below ambient, much like a refrigerator. The cooling unit of our laser phosphor units is comparable to a car radiator. In any case, it's this carefully designed cooling that allows us to reach performance metrics like 30,000 hours lifetime to 80% light level. Of course, the cooling adds to the total volume. Barco's 60,000-lumen RGB laser projector measures 74 x 144 x 29cm; and has two chillers of 70 x 70 x 80cm each. The projector weighs 235 kg.

This means that your checklist for the physical installation should include things like:

  • Are my doors wide enough?
  • Is my lifting equipment strong enough?
  • Do I have to climb stairs?
  • Is my pedestal strong enough?
These aren't rocket science, but they're things that need to be checked in advance. The cooling units of Barco's projectors (both the chiller of the RGB projector as the radiator for laser phosphor) can be put remotely. This can help you in optimizing your booth layout.

In our next post we'll answer the following question: which laser safety instructions do I need to take into account?

Stay tuned!

Barco NV published this content on 19 August 2016 and is solely responsible for the information contained herein.
Distributed by Public, unedited and unaltered, on 19 August 2016 09:10:01 UTC.

Original documenthttp://www.barco.com/en/News/Post/2016/8/19/Frequently-Asked-Questions-FAQ-about-installing-a-laser-cinema-projector-how-to-get-the-projector-in

Public permalinkhttp://www.publicnow.com/view/97CE1D23E6678C4FE2F2B12CC3D4087FABA24C13