2300 Badger Drive
Waukesha, WI 53188-5951
Phone: 877-CPS-INFO (877-277-4636)
www.cooperpower.com
News Release
Contact: Connie SmithCooper Power Systems
262-691-8227
Connie.Smith@cooperindustries.com
Quickly and Easily Locate Faults on Overhead Distribution Lines with a One-Size-Fits-All Programmable Faulted Circuit Indicator from Cooper Power SystemsThe newest member of the S.T.A.R.™ family of faulted circuit indicators includes self-adjusting trip rating and programmable delay reset
WAUKESHA, WI, February 7, 2013 - The new Cooper Power Systems S.T.A.R.™Programmable Delayed Reset Overhead (SDOH) faulted circuit indicator (FCI) is designed to quickly and easily locate faults on bare overhead cable systems to shorten outage times and lower standard outage indices.
The S.T.A.R. - Superior, Tough and Reliable - FCI is designed as a "one size fits all" device for ease of application and stocking. Self-adjusting trip technology and programmable reset allow one model to adapt to a variety of electrical systems and desired reset times. The self-adjusting trip automatically adjusts the trip value based on average load current with a minimum trip value of
175 A and a maximum trip value of 800 A.
Because the S.T.A.R. FCI is easily field-programmable with a simple reset tool, customers no longer need to specify the reset time when ordering. The unit can be programmed for 2, 4, 8, or 24 hour automatic reset, or manual reset. This flexibility reduces inventory as only one FCI is needed for multiple applications.
Cooper Power Systems, the industry leader in power delivery, power quality, power reliability, and end-point automation, has designed this FCI for easy identification and long life. Blinking LEDs provide 360 degree visual indication that the FCI is set and ready for operation with indications for temporary fault, low battery indication, and permanent fault status.
The unit is fully electronic, powered by a long life, lithium ion battery that provides the power to indicate the faulted conditions via dual high-intensity LEDs. A patented clamping mechanism
-MORE-
2- Cooper Power Systems
makes it a "snap" to install on a wide range of cable diameters and can be achieved with a single hotstick. It can be adjusted to fit on bare conductors ranging from 0.25 through 2.0 inches in diameter.
For more information on S.T.A.R.™ faulted circuit indicators, please visit www.cooperpower.com or contact your l ocal sales representative.
Control (IVVC), feeder, and substation automation systems. End-point solutions include: Advanced Metering Infrastructure (AMI) and Demand Response (DR). Cooper Power Systems is a leading provider of engineering optimization and modeling tools. For more information, please visit www.cooperpower.com. For information about Eaton, visit www.eaton.com.
###
distributed by |