Data Modul : eDM-pITX-BT – industrial Pico-ITX SBC based on latest Intel® Atom™ E3815/ J1900 processors
January 28, 2015 at 04:28 am EST
Share
eDM-pITX-BT - industrial Pico-ITX SBC based on latest Intel® Atom™ E3815/ J1900 processors
With the eDM-pITX-BT DATA MODUL presents a new Pico-ITX Board based on Intel® Atom™ processors (formerly codenamed "Bay Trail"). This innovative computer board is developed according to DATA MODUL´s specification in cooperation with a long-term partner, a leading manufacturer of industrial computers.
The fanless eDM-pITX-BT Board is equipped with up to 4GB DDR3L RAM. Heat sources like CPU and RAM are located at the rear side of the PCB. As cooling solution is either a "Heat Spreader" or a "Heat Sink" with a height of only 15mm available. With the heat spreader the board can be directly adapted to a housing.
The flat cooling solutions are possible because of the new low-power Intel processors, that are already based on a 22nm production process. The integrated graphics are significantly more powerful than the previous Atom™ models and support DirectX 11, OpenGL 3, OpenCL 1.2 and high-performance, flexible hardware decoding to decode even multiple high-resolution full HD videos at the same time.
Up to 2560 x 1600 pixels with DisplayPort are natively supported in the processor. It is also possible to connect up to two independent display interfaces via 2x 24-bit LVDS.
The eDM-pITX-BT is available in 2 CPU variants:
• Intel Atom E3815, 1.46GHz, 5 Watt power consumption
• Intel Celeron J1900 4x 2.42GHz, 10 Watt power consumption
The eDM-pITX-BT offers a lot of further interfaces like 1 x USB 3.0 SuperSpeed, 3 x USB 2.0, 2 x COM (one selectable RS232/422/485), 8x GPIOs, 1 x SATA, HD Audio and Gigabit Ethernet. As special highlight there are two onboard Mini-PCIe Slots (one of them with mSATA support). This offers plenty of expansion possibilities for many different applications. Specifically for industrial applications the CAN 2.0 Bus is integrated. A DC Power Jack or alternatively an internal Molex connector can be used for the +12 VDC power supply.
Additionally to this long-term available (min. 7 years) SBC, DATA MODUL offers the suitable TFT Displays (AUO, Innolux, Sharp,...) including the adapted cable set. A time-consuming display adaption is avoided. With the internal power source, most of the TFTs can be supplied directly by the board. A separate power supply for the backlight isn´t needed.
As further service DATA MODUL offers firmware-development for Embedded-Systems, driver adaptions and OS-configurations.
Supported OS:
Microsoft® Windows®: Win 7 (32bit and 64bit), Win 8.X, Win Embedded 7 Standard (WES7), Win Embedded 8 Standard (WES8), Win Embedded Compact 7 (WEC7), Win Embedded Compact 2013 (WEC2013) and Linux.
Data Modul AG Produktion und Vertrieb Von Elektronischen Systemen is a Germany-based provider of display technology. The Company operates through two segments: Displays and Systems. The Displays segment produces displays, electronic sub-assemblies and custom products for use in industrial applications and the automotive industry, as well as easyTouch systems, such as touch sensors and controllers. The Systems segment focuses on easyBoard, easyPanel and easyEmbedded solutions, as well as special monitors for applications in marine navigation and medical devices. easyBoards are DisplayPort/digital visual interface (DVI)/video graphics array (VGA)/video thin-film-transistor (TFT) controller boards that enable users to connect TFT displays to graphics or video interfaces. easyPanels are monitors based on a modular concept for the gaming, medical and marine industries. easyEmbedded relates to a variety of central processing unit (CPU) boards in different form factors and performance levels.
DATA MODUL AKTIENGESELLSCHAFT, PRODUKTION UND VERTRIEB VON ELEKTRONISCHEN SYSTEMEN 
