DMC GLOBAL INC 
By BOULDER, CO, Nov 01, 2011 (MARKETWIRE via COMTEX) --
Dynamic Materials Corporation (DMC) (NASDAQ: BOOM), a diversified provider of industrial products and services, and the world's leading manufacturer of explosion-welded clad metal plates, today reported financial results for its third quarter ended September 30, 2011.
Sales were $54.9 million, up 33% from $41.3 million in the third quarter last year, and a slight increase versus sales of $54.2 million in this year's second quarter. Gross margin was 27% versus 26% in last year's third quarter and 29% in the second quarter.
Operating income was $5.7 million, up 93% from $2.9 million in the same quarter last year and down slightly from $5.9 million in the second quarter. Net income was $4.3 million, or $0.32 per diluted share, an increase of 222% from net income of $1.3 million, or $0.10 per diluted share, in the year-ago third quarter and a 10% improvement from net income of $3.9 million, or $0.29 per diluted share, in the second quarter.
Adjusted EBITDA was $9.6 million, a 43% improvement from $6.7 million in last year's third quarter and up modestly from $9.5 million in the second quarter. Adjusted EBITDA is a non-GAAP (generally accepted accounting principle) financial measure used by management to measure operating performance. See additional information about adjusted EBITDA at the end of this news release, as well as a reconciliation of adjusted EBITDA to GAAP measures.
Explosive Metalworking Sales of $33.4 million were reported by DMC's Explosive Metalworking segment, a 34% increase from sales of $24.9 in the third quarter last year. Operating income increased 141% to $4.6 million from $1.9 million in the 2010 third quarter. Adjusted EBITDA was $6.1 million, an improvement of 73% from $3.5 million in the comparable year-ago quarter. The segment reported an order backlog of $47 million versus $54 million at the end of the second quarter.
Oilfield Products Sales at DMC's Oilfield Products segment increased 42% to $18.8 million from $13.2 million in the 2010 third quarter. Operating income was $1.9 million, up 17% from $1.6 million in the prior year's third quarter, while adjusted EBITDA was up 19% to $3.3 million from $2.8 million in the 2010 third quarter.
AMK Welding DMC's AMK Welding segment reported third quarter sales of $2.7 million, down 15% from $3.2 million in the same quarter of 2010. Operating income was $572,000 compared with $881,000 in the comparable year-ago quarter, and adjusted EBITDA was $710,000 versus $1.0 million in the comparable quarter last year.
Management Commentary "Third quarter sales growth was fueled by healthy spending in the upstream oil and gas industry and a number of our other Explosive Metalworking end markets," said Yvon Cariou, president and CEO. "In addition, we saw continued strong sales at our Oilfield Products segment, which is benefiting from the very active drilling environment in North America and several overseas regions."
Cariou added, "During the current fiscal year, we have effectively captured a number of the prospective orders we had been tracking on our project 'hot list.' As a result, we have elevated our full-year 2011 sales forecasts in each of the past three quarters. As we have converted order prospects to bookings, we also have seen a steady stream of new contract opportunities emerge, and this has helped us maintain a healthy hot list. So despite the continued macroeconomic concerns, we are still optimistic about DMC's prospects for continued long-term growth."
Guidance Rick Santa, senior vice president and chief financial officer, said, "We have elevated our 2011 sales-growth forecast to a range of 31% to 33% versus last year, up from our prior full-year growth forecast of 28% to 30%. We expect our full-year consolidated gross margin to be in a range of 26% to 27%. In light of the sequential explosion-welding backlog decline, fourth quarter sales are expected to drop by approximately 10% versus the third quarter, while fourth quarter gross margin is expected to be approximately 27%."
DMC's blended effective tax rate for fiscal 2011 is now projected in a range of 25% to 26% versus the previously forecasted range of 26% to 28%. The Company's tax rate is expected to rise to a normalized level of between 28% and 30% in years thereafter.
Nine-month Results Sales for the nine-month period were $154.6 million, up 41% from sales of $110.0 million in the same period last year. Gross margin increased to 26% from 25% in last year's nine-month period. Operating income improved 148% to $13.1 million from $5.3 million. Net income advanced 125% to $8.9 million, or $0.67 per diluted share, from net income of $4.0 million, or $0.30 per diluted share, at the nine-month mark last year. Adjusted EBITDA increased 54% to $24.1 million versus $15.6 million in the comparable year-ago period.
The Explosive Metalworking segment reported nine-month sales of $95.2 million, up 31% from $72.9 million in the same period of 2010. Operating income was $11.8 million, up 89% from $6.2 million in the same period a year ago. Adjusted EBITDA increased 53% to $16.2 million compared with $10.6 million in the same period a year ago.
Nine-month sales at DMC's Oilfield Products segment increased 79% to $51.6 million from $28.9 million in last year's nine-month period. Excluding incremental sales contributions of $5.7 million from operations acquired during last year's second quarter, Oilfield Product sales increased $17.0 million, or 59%, versus the same period last year. The segment reported operating income of $4.0 million, up 210% from $1.3 million in the same period a year ago. Nine-month adjusted EBITDA improved 75% to $7.7 million from $4.4 million in the prior-year's nine-month period.
AMK Welding recorded nine-month sales of $7.8 million, down 3% from $8.1 million in the comparable year-ago period. Operating income was $1.7 million versus $2.0 million in the prior-year period. Adjusted EBITDA at the nine-month mark was $2.1 million compared with $2.4 million in the same period a year ago.
Conference call information Management will hold a conference call to discuss these results today at 5:00 p.m. Eastern (3:00 p.m. Mountain). Investors are invited to listen to the call live via the Internet at www.dynamicmaterials.com, or by dialing into the teleconference at 877-407-8031 (201-689-8031 for international callers). No passcode is necessary. Participants should access the website at least 15 minutes early to register and download any necessary audio software. A replay of the webcast will be available for 90 days and a telephonic replay will be available through November 8, 2011, by calling 877-660-6853 (201-612-7415 for international callers) and entering the Account Number 286 and the passcode 380635.
Use of Non-GAAP Financial Measures Non-GAAP results are presented only as a supplement to the financial statements based on U.S. generally accepted accounting principles (GAAP). The non-GAAP financial information is provided to enhance the reader's understanding of DMC's financial performance, but no non-GAAP measure should be considered in isolation or as a substitute for financial measures calculated in accordance with GAAP. Reconciliations of the most directly comparable GAAP measures to non-GAAP measures are provided within the schedules attached to this release.
EBITDA is defined as net income plus or minus net interest plus taxes, depreciation and amortization. Adjusted EBITDA excludes from EBITDA stock-based compensation and, when appropriate, other items that management does not utilize in assessing DMC's operating performance (as further described in the attached financial schedules). None of these non-GAAP financial measures are recognized terms under GAAP and do not purport to be an alternative to net income as an indicator of operating performance or any other GAAP measure.
Management uses these non-GAAP measures in its operational and financial decision-making, believing that it is useful to eliminate certain items in order to focus on what it deems to be a more reliable indicator of ongoing operating performance and the company's ability to generate cash flow from operations. As a result, internal management reports used during monthly operating reviews feature the adjusted EBITDA. Management also believes that investors may find non-GAAP financial measures useful for the same reasons, although investors are cautioned that non-GAAP financial measures are not a substitute for GAAP disclosures. EBITDA and adjusted EBITDA are also used by research analysts, investment bankers and lenders to assess operating performance. For example, a measure similar to EBITDA is required by the lenders under DMC's credit facility.
Because not all companies use identical calculations, DMC's presentation of non-GAAP financial measures may not be comparable to other similarly titled measures of other companies. However, these measures can still be useful in evaluating the company's performance against its peer companies because management believes the measures provide users with valuable insight into key components of GAAP financial disclosures. For example, a company with greater GAAP net income may not be as appealing to investors if its net income is more heavily comprised of gains on asset sales. Likewise, eliminating the effects of interest income and expense moderates the impact of a company's capital structure on its performance.
All of the items included in the reconciliation from net income to EBITDA and adjusted EBITDA are either (i) non-cash items (e.g., depreciation, amortization of purchased intangibles and stock-based compensation) or (ii) items that management does not consider to be useful in assessing DMC's operating performance (e.g., income taxes and gain on sale of assets). In the case of the non-cash items, management believes that investors can better assess the company's operating performance if the measures are presented without such items because, unlike cash expenses, these adjustments do not affect DMC's ability to generate free cash flow or invest in its business. For example, by adjusting for depreciation and amortization in computing EBITDA, users can compare operating performance without regard to different accounting determinations such as useful life. In the case of the other items, management believes that investors can better assess operating performance if the measures are presented without these items because their financial impact does not reflect ongoing operating performance.
About Dynamic Materials Corporation Based in Boulder, Colorado, Dynamic Materials Corporation serves a global network of industrial customers through two core business segments: Explosive Metalworking and Oilfield Products; as well as a specialized industrial service provider, AMK Welding. The Explosive Metalworking segment is the world's largest manufacturer of explosion-welded clad metal plates, which are used to fabricate capital equipment utilized within various process industries and other industrial sectors. Oilfield Products is an international manufacturer and marketer of advanced explosive components and systems used to perforate oil and gas wells. AMK Welding utilizes various specialized technologies to weld components for use in power-generation turbines, and commercial and military jet engines. For more information, visit the Company's websites at:
http://www.dynamicmaterials.com and http://www.dynaenergetics.de.
Safe Harbor Language Except for the historical information contained herein, this news release contains forward-looking statements, including our guidance for fourth quarter and full-year 2011 sales, margins and tax rates, growth and diversification prospects, as well as expectations about business conditions and growth opportunities, all of which involve risks and uncertainties. These risks and uncertainties include, but are not limited to, the following: our ability to realize sales from our backlog; our ability to obtain new contracts at attractive prices; the size and timing of customer orders and shipments; fluctuations in customer demand; our ability to successfully source and execute upon acquisition opportunities; fluctuations in foreign currencies, changes to customer orders; the cyclicality of our business; competitive factors; the timely completion of contracts; the timing and size of expenditures; the timing and price of metal and other raw material; the adequacy of local labor supplies at our facilities; current or future limits on manufacturing capacity at our various operations; the availability and cost of funds; and general economic conditions, both domestic and foreign, impacting our business and the business of the end-market users we serve; as well as the other risks detailed from time to time in the Company's SEC reports, including the report on Form 10-K for the year ended December 31, 2010.
DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
FOR THE THREE AND NINE MONTHS ENDED SEPTEMBER 30, 2011 AND 2010
(Dollars in Thousands, Except Share Data)
(unaudited)
Three months ended Nine months ended
September 30, September 30,
------------------------ ------------------------
2011 2010 2011 2010
----------- ----------- ----------- -----------
NET SALES $ 54,890 $ 41,298 $ 154,630 $ 109,913
COST OF PRODUCTS SOLD 40,058 30,445 114,023 82,819
----------- ----------- ----------- -----------
Gross profit 14,832 10,853 40,607 27,094
----------- ----------- ----------- -----------
COSTS AND EXPENSES:
General and
administrative
expenses 4,359 3,487 12,227 9,990
Selling and
distribution expenses 3,359 3,047 10,997 7,918
Amortization of
purchased intangible
assets 1,448 1,376 4,324 3,913
----------- ----------- ----------- -----------
Total costs and
expenses 9,166 7,910 27,548 21,821
----------- ----------- ----------- -----------
INCOME FROM OPERATIONS 5,666 2,943 13,059 5,273
OTHER INCOME (EXPENSE):
Gain on step
acquisition of joint
ventures - - - 2,117
Other income
(expense), net (9) (433) (348) (402)
Interest expense (326) (667) (1,222) (2,473)
Interest income 1 6 4 71
Equity in earnings of
joint ventures - - - 255
----------- ----------- ----------- -----------
INCOME BEFORE INCOME
TAXES 5,332 1,849 11,493 4,841
INCOME TAX PROVISION 1,072 540 2,637 891
----------- ----------- ----------- -----------
NET INCOME 4,260 1,309 8,856 3,950
Less: Net loss
attributable to
noncontrolling
interest (13) (17) (36) -
----------- ----------- ----------- -----------
NET INCOME ATTRIBUTABLE
TO DYNAMIC
MATERIALS CORPORATION $ 4,273 $ 1,326 $ 8,892 $ 3,950
=========== =========== =========== ===========
INCOME PER SHARE:
Basic $ 0.32 $ 0.10 $ 0.67 $ 0.30
=========== =========== =========== ===========
Diluted $ 0.32 $ 0.10 $ 0.67 $ 0.30
=========== =========== =========== ===========
WEIGHTED AVERAGE NUMBER
OF SHARES OUTSTANDING:
Basic 13,065,397 12,939,274 13,060,009 12,807,826
=========== =========== =========== ===========
Diluted 13,072,076 12,951,397 13,069,765 12,820,508
=========== =========== =========== ===========
DIVIDENDS DECLARED PER
COMMON SHARE $ 0.04 $ 0.04 $ 0.12 $ 0.12
=========== =========== =========== ===========
DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES
CONDENSED CONSOLIDATED BALANCE SHEETS
(Dollars in Thousands)
(unaudited)
September 30, December 31,
2011 2010
ASSETS (unaudited)
------------- -------------
Cash and cash equivalents $ 4,116 $ 4,572
Accounts receivable, net 34,751 27,567
Inventories 46,917 35,880
Other current assets 6,385 4,716
------------- -------------
Total current assets 92,169 72,735
Property, plant and equipment, net 40,212 39,806
Goodwill, net 39,546 39,173
Purchased intangible assets, net 45,158 48,490
Other long-term assets 1,506 1,189
------------- -------------
Total assets $ 218,591 $ 201,393
============= =============
LIABILITIES AND STOCKHOLDERS' EQUITY
Accounts payable $ 16,425 $ 16,109
Customer advances 2,756 1,531
Dividend payable 534 529
Accrued income taxes 930 477
Other current liabilities 8,636 7,529
Lines of credit 6,553 2,621
Current portion of long-term debt 9,405 9,596
------------- -------------
Total current liabilities 45,239 38,392
Long-term debt 14,131 14,579
Deferred tax liabilities 10,917 12,083
Other long-term liabilities 1,278 1,255
Stockholders' equity 147,026 135,084
------------- -------------
Total liabilities and stockholders' equity $ 218,591 $ 201,393
============= =============
DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
FOR THE NINE MONTHS ENDED SEPTEMBER 30, 2011 AND 2010
(Dollars in Thousands)
(unaudited)
2011 2010
----------- -----------
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income including noncontrolling interest $ 8,856 $ 3,950
Adjustments to reconcile net income to net cash
provided by operating activities -
Depreciation (including capital lease
amortization) 4,183 3,908
Amortization of purchased intangible assets 4,324 3,913
Amortization of capitalized debt issuance
costs 261 489
Stock-based compensation 2,535 2,537
Deferred income tax benefit (1,904) (953)
Equity in earnings of joint ventures - (255)
Gain on step acquisition of joint ventures - (2,117)
Loss on disposal of property, plant and
equipment 69 -
Change in working capital, net (16,066) (1,218)
----------- -----------
Net cash provided by operating activities 2,258 10,254
----------- -----------
CASH FLOWS FROM INVESTING ACTIVITIES:
Acquisition of Austin Explosives Company - (3,620)
Step acquisition of joint ventures, net of cash
acquired - (2,065)
Acquisition of property, plant and equipment (4,364) (2,309)
Change in other non-current assets 20 (59)
----------- -----------
Net cash used in investing activities (4,344) (8,053)
----------- -----------
CASH FLOWS FROM FINANCING ACTIVITIES:
Payment on syndicated term loans - (15,374)
Borrowings on lines of credit, net 3,999 4,682
Payments on long-term debt (633) (593)
Payments on capital lease obligations (233) (215)
Payment of dividends (1,596) (1,561)
Contribution from noncontrolling stockholder 42 -
Net proceeds from issuance of common stock 99 70
Tax impact of stock-based compensation (109) (639)
----------- -----------
Net cash provided by (used in) financing
activities 1,569 (13,630)
----------- -----------
EFFECTS OF EXCHANGE RATES ON CASH 61 115
----------- -----------
NET DECREASE IN CASH AND CASH EQUIVALENTS (456) (11,314)
CASH AND CASH EQUIVALENTS, beginning of the period 4,572 22,411
----------- -----------
CASH AND CASH EQUIVALENTS, end of the period $ 4,116 $ 11,097
=========== ===========
DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES
RECONCILIATIONS OF NON-GAAP FINANCIAL MEASUREMENTS TO MOST
DIRECTLY COMPARABLE GAAP FINANCIAL MEASUREMENTS
(Dollars in thousands)
Three months ended Nine months ended
September 30, September 30,
-------------------- --------------------
2011 2010 2011 2010
--------- --------- --------- ---------
(unaudited) (unaudited)
Explosive Metalworking Group $ 33,396 $ 24,925 $ 95,221 $ 72,921
Oilfield Products 18,790 13,208 51,563 28,868
AMK Welding 2,704 3,165 7,846 8,124
--------- --------- --------- ---------
Net sales $ 54,890 $ 41,298 $ 154,630 $ 109,913
========= ========= ========= =========
Explosive Metalworking Group $ 4,599 $ 1,905 $ 11,758 $ 6,228
Oilfield Products 1,881 1,604 3,964 1,279
AMK Welding 572 881 1,742 2,006
Unallocated expenses (1,386) (1,447) (4,405) (4,240)
--------- --------- --------- ---------
Income from operations $ 5,666 $ 2,943 $ 13,059 $ 5,273
========= ========= ========= =========
For the three months ended September 30, 2011
-----------------------------------------------------
Explosive
Metalworking Oilfield AMK Unallocated
Group Products Welding Expenses Total
------------ --------- --------- ----------- -------
(unaudited)
Income from operations $ 4,599 $ 1,881 $ 572 $ (1,386) $ 5,666
Adjustments:
Net loss
attributable to
noncontrolling
interest - 13 - - 13
Stock-based
compensation - - - 872 872
Depreciation 901 516 138 - 1,555
Amortization of
purchased
intangibles 565 883 - - 1,448
------------ --------- --------- ----------- -------
Adjusted EBITDA $ 6,065 $ 3,293 $ 710 $ (514) $ 9,554
============ ========= ========= =========== =======
For the three months ended September 30, 2010
-----------------------------------------------------
Explosive
Metalworking Oilfield AMK Unallocated
Group Products Welding Expenses Total
------------ --------- --------- ----------- -------
(unaudited)
Income from operations $ 1,905 $ 1,604 $ 881 $ (1,447) $ 2,943
Adjustments:
Net loss
attributable to
noncontrolling
interest - 17 - - 17
Stock-based
compensation - - - 834 834
Depreciation 1,051 333 120 - 1,504
Amortization of
purchased
intangibles 557 819 - - 1,376
------------ --------- --------- ----------- -------
Adjusted EBITDA $ 3,513 $ 2,773 $ 1,001 $ (613) $ 6,674
============ ========= ========= =========== =======
DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES
RECONCILIATIONS OF NON-GAAP FINANCIAL MEASUREMENTS TO MOST
DIRECTLY COMPARABLE GAAP FINANCIAL MEASUREMENTS
(Dollars in thousands)
For the nine months ended September 30, 2011
-----------------------------------------------------
Explosive
Metalworking Oilfield AMK Unallocated
Group Products Welding Expenses Total
------------ --------- --------- ----------- -------
(unaudited)
Income from operations $ 11,758 $ 3,964 $ 1,742 $ (4,405) $13,059
Adjustments:
Net loss
attributable to
noncontrolling
interest - 36 - - 36
Stock-based
compensation - - - 2,535 2,535
Depreciation 2,734 1,070 379 - 4,183
Amortization of
purchased
intangibles 1,685 2,639 - - 4,324
------------ --------- --------- ----------- -------
Adjusted EBITDA $ 16,177 $ 7,709 $ 2,121 $ (1,870) $24,137
============ ========= ========= =========== =======
For the nine months ended September 30, 2010
-----------------------------------------------------
Explosive
Metalworking Oilfield AMK Unallocated
Group Products Welding Expenses Total
------------ --------- --------- ----------- -------
(unaudited)
Income from operations $ 6,228 $ 1,279 $ 2,006 $ (4,240) $ 5,273
Adjustments:
Stock-based
compensation - - - 2,537 2,537
Depreciation 2,634 924 350 - 3,908
Amortization of
purchased
intangibles 1,706 2,207 - - 3,913
------------ --------- --------- ----------- -------
Adjusted EBITDA $ 10,568 $ 4,410 $ 2,356 $ (1,703) $15,631
============ ========= ========= =========== =======
Three months ended Nine months ended
September 30, September 30,
-------------------- --------------------
2011 2010 2011 2010
--------- --------- --------- ---------
(unaudited) (unaudited)
Net income attributable to DMC $ 4,273 $ 1,326 $ 8,892 $ 3,950
Interest expense 326 667 1,222 2,473
Interest income (1) (6) (4) (71)
Provision for income taxes 1,072 540 2,637 891
Depreciation 1,555 1,504 4,183 3,908
Amortization of purchased
intangible assets 1,448 1,376 4,324 3,913
--------- --------- --------- ---------
EBITDA 8,673 5,407 21,254 15,064
Stock-based compensation 872 834 2,535 2,537
Other (income) expense, net 9 433 348 (1,715)
Equity in earnings of joint
ventures - - - (255)
--------- --------- --------- ---------
Adjusted EBITDA $ 9,554 $ 6,674 $ 24,137 $ 15,631
========= ========= ========= =========
CONTACT: Pfeiffer High Investor Relations, Inc. Geoff High 303-393-7044
SOURCE: Dynamic Materials Corp.
