Greatland Gold : Bromus – Drilling Approvals Received

Greatland Gold plc (LON:GGP), the London Stock Exchange AIM quoted precious and base metals exploration and development business, is pleased to announce that the Company has received approval to commence drilling at the Bromus project in Western Australia.

Highlights

· Greatland is pleased to announce that the Programme of Work application for the planned drilling programme at the Bromus project (see announcement dated 20 February 2017) has been approved by the Western Australian Department of Mines and Petroleum;

· Programme of Work application includes permission for two drill holes, both of which will utilise existing drill pads, that will target highly conductive targets which were identified by recent downhole EM surveys (see announcement dated 14 November 2016);

· The two targets are relatively shallow, well constrained by modelling and can be drilled from existing drill pads, thereby reducing the overall cost of this drilling campaign;

· Drilling is expected to commence within the next few weeks and a further announcement will be made at that time.

Gervaise Heddle, Chief Executive Officer, commented:'We are very pleased to be able to move forward with drilling at the Bromus project. This drilling campaign will target two of the highly conductive targets that were identified by downhole EM modelling late last year and which, in the opinion of Southern Geosciences Consultants Pty Ltd, represent high priority targets for massive sulphide mineralisation.

We expect drilling to commence within the next few weeks. We will make further announcements as appropriate.'

Bromus Project, Western Australia

The Bromus project is located in southern Western Australia, approximately 25km south west of the town of Norseman, and covers approximately 93 square kilometres. Several significant clusters of gold and nickel sulphide deposits lie in the region, such as those at Central Norseman, Kambalda and Widgiemooltha. Greatland owns 100% of the project.

A review of detailed airborne geophysics defined a 4.5km long nickel sulphide prospective ultramafic, with coherent elevated surface geochemistry to 2,690ppm Ni, within the Bromus project area. Field work confirmed the presence of flow textured ultramafic lithologies and, despite the proximity to other deposits, no previous exploration for nickel sulphides is apparent. A fixed loop ground electromagnetic (EM) survey was completed in 2015 which confirmed several significant bedrock conductors in the survey area.

Such large bodies of conductive material are typically signs of sulphide deposits. The tenor (or grade) of nickel in these deposits can only be determined by drilling and laboratory analysis.

Recent drilling of the conductive bodies by Greatland intersected ultramafic, mafic and granitic lithologies along with massive and stringer sulphide mineralisation explaining the EM response of several targets. However, the primary EM target (BRD001) remained unexplained.

Downhole EM (DHEM) surveys were recently completed to determine the size and orientation of conductors intersected in each hole and to locate the conductor not intersected in BRD001.

DHEM was successful in identifying several highly conductive targets not intersected by previous drilling by Greatland. These targets have conductances which are consistent with massive sulphide mineralisation and, as such, are considered high priority targets. The conductive targets are located close to BRD001 and BRD003. No conductive sediments were intersected in either of hole BRD001 and BRD003 discounting these as the source of the downhole EM response. The targets are well constrained by the modelling and relatively shallow at approximately 100m below surface.

Modelling of DHEM data shows the conductive targets adjacent to holes BRD001 and BRD003 are of good size being 130m x 100m and 150m x 70m respectively. Two additional drill holes have been planned to intersect the targets utilising existing drill pads.

Drawings of modelled EM targets for BRD001 and BRD003 with previous drill hole traces along with new proposed holes can be found at the following link http://greatlandgold.com/project/2014/bromus.

A Programme of Work (POW) application for additional drill holes was lodged with the Department of Mines and Petroleum (DMP) in Western Australia and formal approval has been received. We will utilise existing drill pads which has expedited the approvals process and will reduce overall costs. Drilling is expected to commence in the coming weeks and a further announcement will be made at that time.

Additional information on the Bromus project can be found on the Company's web site at www.greatlandgold.com/projects

Download full PDF here