Benefitting from its exposure to the hot tablet and smartphone and businesses, the market for microelectromechanical systems (MEMS) in consumer electronics and mobile communications devices is set to generate record growth in 2011, according to the latest IHS iSuppli Consumer & Mobile MEMS Market Tracker report from information and analysis provider IHS (NYSE: IHS).
Revenue for consumer and mobile MEMS—the largest and most dynamic sector of the MEMS market—will hit $2.25 billion in 2011, up by a best-ever annual expansion rate of 37 percent. This compares to the previous high-water mark of 27 percent in 2010 when revenue reached $1.64 billion.
Overall, the five-year revenue forecast starting from 2010 calls for growth by a factor of nearly three to $4.54 billion in 2015, equivalent to a compound annual growth rate of 22.5 percent, as shown in the figure below.
“From the accelerometers and gyroscopes that provide intuitive motion-based displays, to the microphones that allow people to talk on the phone, to the bulk acoustic wave filters that facilitate wireless Internet access, MEMS devices provide many of the basic functions that make tablets and smartphones such compelling products.” said Jérémie Bouchaud, director and principal analyst for MEMS and sensors at IHS. “Because of this, MEMS content in these devices is increasing, driving the expansion of the entire consumer and mobile MEMS market.”
Beyond the 3-axis gyroscopes, accelerometers, microphones and bulk acoustic wave filters already found in tablets and smartphones, a new class of emerging MEMS sensors is stimulating growth. In this category are devices such as thermopiles, varactors, timing devices, pressure sensors for indoor navigation, radio frequency MEMS switches and actuators used for autofocus functions in high-megapixel cameras and pico projectors.
The real blockbuster this year, however, is the 3-axis gyroscope, a standard MEMS device that when used in conjunction with an accelerometer and a digital compass allows for more accurate, smoother and faster motion sensing for applications such as gaming and augmented reality. Revenue in 2011 for 3-axis gyroscopes will soar to $420 million, up from $127 million last year. The 3-axis gyroscope can be found in smartphones such as the iPhone 4 from Apple Inc. and the Galaxy SII from Samsung Electronics Co. Ltd.; in virtually all tablet devices, including the Apple iPad 2 and the Samsung Galaxy Tab; as well as in gaming devices like the PlayStation Move motion controller from Sony Corp.
Overall, gyroscopes this year will generate the second-highest revenue among consumer and mobile MEMS, second only to accelerometers, the device that allows smartphones to rotate from a portrait to landscape orientation and vice versa.
Not surprisingly, mobile handsets—including smartphones—will be the largest application for MEMS this year. MEMS revenue for handsets will reach $1.21 billion, approximately 50 percent of the total consumer and mobile MEMS space.
In second place will be gaming with $221.49 million in revenue, followed by media tablets with $158.64 million. MEMS revenue from tablets, in particular, will show the fastest growth, up an astounding 331 percent from $36.83 million in 2010, and is set to overtake gaming next year to clinch second place.
For its part, gaming will decline this year and the next because of the saturation of the casual gaming market, before it expands again in the 2013-2015 time period as new platforms arrive that use motion sensors.
Unlike gaming, however, nearly all other segments in the space will boast continued growth, including laptops, standalone projectors, cameras, white goods, MP3 players, remote controllers, battery chargers for PCs, toy helicopters, personal navigation devices and ebook readers.
Two new MEMS devices were introduced earlier this year. One was a new type of joystick launched in April by Knowles Electronics, the leading manufacturer of MEMS microphones. The MEMS joystick forgoes optical or magnetic sensors, is slimmer and less power-hungry. The device soon should start finding its way into gaming accessories for handsets and tablets, IHS believes.
The second new MEMS device for the year is a thermopile, introduced in May by Texas Instruments Inc., the top MEMS manufacturer overall. The thermopile, a contactless temperature sensor, can be placed into a phone or tablet next to the processor to monitor the temperature of the phone or tablet case. By controlling the dissipated heat, the thermopile helps to better tune the operations of the processor as well as push its limits to extract optimal performance.
Consumer MEMS Market Outdoes Itself Again in 2012 with 37% Growth.”
About IHS (www.ihs.com)
IHS (NYSE: IHS) is the leading source of information and insight in critical areas that shape today’s business landscape, including energy and power; design and supply chain; defense, risk and security; environmental, health and safety (EHS) and sustainability; country and industry forecasting; and commodities, pricing and cost. Businesses and governments in more than 165 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS employs more than 5,100 people in more than 30 countries around the world.
IHS is a registered trademark of IHS Inc. All other company and product names may be trademarks of their respective owners. Copyright © 2011 IHS Inc. All rights reserved.