IXYS Corporation (NASDAQ:IXYS), a leader in power semiconductors and IC technologies for energy efficient products used in power conversion and motor control applications, announced today the extension of the D2-Pak (TO-263) and D3-Pak (TO-268) packages without middle terminal for higher voltage solutions that require Surface Mount Devices (SMD) with enlarged creepage distances.
“The new D2 and D3-Pak design without a middle pin provides creepage distances that fulfill standard demands without any additional arrangements. This allows cost effective solutions because a reduction in size and weight are achievable without a reduction in energy efficiency. Integrated power design with small modules can be replaced with low cost SMD alternatives providing more automated and faster assembly structures and an increase in reliability,” states Dr. Elmar Wisotzki, Director of Technology at IXYS Germany. “The expansion of our product portfolio in the SMD high voltage range is a reaction to the growing demand for compact PCB designs for higher voltage applications between 1200V and 1800V.”
Prior SMD solutions with standard discrete components did not offer practicable solutions for applications higher than 1200V. The new IXYS D2-Pak and D3-Pak designs now offer a recommended and standardized footprint, but with compliance to the high voltage ‘creepage’ specifications.
For D3-Pak the creepage distance between terminal and copper backside is greater than or equal to 5.80 mm. This enables the use of 1.2KV D3-Pak in pollution degree 2 industrial designs. For the D2-Pak, the creepage distance between terminal and copper backside is greater than or equal to 4.70 mm. In addition to industrial power control applications, these devices target other applications with 1.2KV to 1.8KV such as power supplies, UPS, renewable energy, motor drives and medical applications.
The extended product portfolio now allows designers to chose from several SCR topologies, standard rectifiers and also IXYS’ dual SCR DT-Triac solutions. Fast diodes and SiC MosFet products complete the current product range.
The following products are available for order:
- CMA20E1600PZ | D2-PakHV, single SCR; 20A; 1600V | |||
- CMA30E1600PZ | D2-PakHV, single SCR; 30A; 1600V | |||
- CME30E1600PZ | D2-PakHV, single semifast SCR; 30A; 1600V | |||
- CLA30E1200NPZ | D2-PakHV, single SCR; 30A; 1200V (Triac combination with CLB30) | |||
- CLB30I1200PZ | D2-PakHV, single anode gated SCR; 30A; 1200V | |||
- CLA30MT1200NPZ | D2-PakHV, single Triac; 30A; 1200V | |||
- CLA40MT1200NPZ | D2-PakHV, single Triac; 40A; 1200V | |||
- DMA10P1600PZ | D2-PakHV; phase-leg for diode bridges; 10A; 1600V | |||
- DMA10P1800PZ | D2-PakHV; phase-leg for diode bridges; 10A; 1800V | |||
- DAA10P1800PZ | D2-PakHV; phase-leg with Avalanche capability; 10A; 1800V | |||
- DAA10EM1800PZ | D2-PakHV; single diode with Avalanche capability; 10A; 1800V | |||
- DMA30IM1600PZ | D2-PakHV; single diode; 30A; 1600V | |||
- DNA30E2200PZ | D2-PakHV; High voltage single diode; 30A; 2200V | |||
- DNA30EM2200PZ | D2-PakHV; High voltage single diode; 30A; 2200V | |||
- DSEI12-12AZ | D2-PakHV; single FRED; 12A; 1200V | |||
- DSEP12-12AZ | D2-PakHV; single fast HiPerFRED; 12A; 1200V | |||
- DSEP12-12BZ | D2-PakHV; single extreme fast HiPerFRED; 12A; 1200V | |||
- CMA50E1600TZ | D3-PakHV, single SCR; 50A; 1600V | |||
- CLA60MT1200NTZ | D3-PakHV, single Triac; 60A; 1200V | |||
- DSP45-12TZ | D3-PakHV; phase-leg for diode bridges; 45A; 1200V | |||
- DSP45-16TZ | D3-PakHV; phase-leg for diode bridges; 45A; 1600V | |||
- MCB60I1200TZ | D3-PakHV, single SiC MosFet; 60A;1200V | |||
Standard delivery mode for the D2-Pak is tape and reel. For the D3-Pak, standard delivery is by tubes although tape and reel is available upon request.
More product information is available on the IXYS website or by contacting your nearest IXYS sales office.
About IXYS Corporation
Since its founding, IXYS Corporation has been developing power semiconductors and mixed signal ICs to improve power conversion efficiency, generate solar and wind power and provide efficient motor control for industrial applications. IXYS and its subsidiary companies offer a diversified product base that addresses worldwide needs for power control in the growing cleantech industries, renewable energy markets, telecommunications, medical devices, transportation applications, flexible displays and RF power.
Safe Harbor Statement
Any statements contained in this press release that are not statements of historical fact, including the benefits, savings, efficiency, performance, features and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-k for the fiscal year ended March 31, 2015. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.
View source version on businesswire.com: http://www.businesswire.com/news/home/20150714005578/en/