Special eye-catcher at the KSB stand from 11 to 13 November 2014 will be the SALINO Pressure Center, a system designed for economical membrane water treatment. 

The Frankenthal-based pump manufacturer will showcase this product at the Nuremberg trade fair at the request of engineering contractors operating at a global level since many non-European breweries must treat their process water themselves. The SALINO Pressure Center consists of an axial piston pump and an axial piston motor, arranged on a common shaft. Driven by the diaphragm return flow, the axial piston motor transfers its power directly to the pump shaft. As pipes are not required between the individual components, the system takes up minimal space and is highly energy-efficient.

The focal point of KSB's presentation in Nuremberg will be the four hygienic pump series Vitachrom, Vitacast, Vitalobe and Vitaprime. Thanks to their almost complete lack of dead volume, they are very easy to clean and thus meet every requirement in respect of absolutely sterile processes. The pumps' excellent cleaning and steaming in place (CIP/SIP) capabilities are also promoted by electropolished wetted components and the use of high-grade stainless steels. Whether it be for handling mash and wort or products in the hygienic production area of breweries: thanks to the large number of design variants, these pumps can be employed for almost every task involving the transport of liquid or viscous food. All pumps belonging to the Vita series have been awarded the certificates common to the industry, and their elastomer components conform to FDA standards.

At this year's BrauBeviale, KSB will present its multi-functional Amtronic valve control unit for pneumatic actuators which is ideally suited for use in the beer and beverage industry. Amtronic incorporates functions ranging from simple open/close control of a pneumatic valve with open/closed position signalling to control tasks which are independently completed from a higher-level control station.

To represent the extensive KSB valve product range, SISTO-C diaphragm valves will be on display alongside gate valves and shut-off butterfly valves. SISTO-C's components are made exclusively of high-alloy, austenitic materials. The bodies are without dead volume and can be cleaned without leaving any residues. The use of multi-port valves enables very complex systems without any dead end pipe runs (dead legs).

The KSB stand at the fairgrounds has the number 612 and is situated in Hall 6.

/linkableblob/ksb-en/2417536-608988/lightboxLs/ksb-braubeviale-2014-bild-lightboxLs.jpgGroßansichtSALINO Pressure Center designed for economical water treatment

distributed by