UK | Deutsch | Français | Italiano | 简体中文 | 繁體中文 | 日本語 | 한국어

News Release | www.linear.com
High­Res Image Data Sheet Word Document

Configurable Buck DC/DCs Deliver a Total of 8A from 2 to 4 Independent Outputs for Power System Flexibility

MILPITAS, CA ­ January 8, 2015 ­ Linear Technology Corporation announces the LTC3371, a highly integrated general­purpose power management solution for systems requiring multiple low voltage power supplies. The device features four synchronous buck converters, each powered from independent 2.25V to 5.5V inputs, and each configurable to share up to four of eight available 1A power stages. With eight unique output current configurations, the LTC3371 provides substantial flexibility and ease of reuse across many different applications. The device is ideal for a wide variety of multichannel industrial, automotive, communications and distributed power systems.
The LTC3371's buck power stages can be connected in parallel by simply combining their respective VIN and SW
pins and programming the desired configuration on the C1­C3 pins. Up to four adjacent power stages can be
combined on a single channel, resulting in eight unique output configurations ranging from a quad 2A buck to a dual
4A buck. A single inductor may be used for each buck regulator, and any unused power stages may be added to one of the high power channels for improved overall efficiency.
The LTC3371's precision enable pin thresholds, independent power­on reset outputs, watchdog timer and die temperature monitor, provide flexible and reliable power­up sequencing and system monitoring. All of the switching regulators are internally compensated and need only external feedback resistors to set the output voltages. The common buck switching frequency can be programmed with an external resistor, synchronized to an external oscillator or set to a default internal 2MHz clock. The switching regulators may be programmed to operate either in Burst Mode® operation for high efficiency at light loads or in forced continuous PWM mode for lowest noise at light loads. The bucks are phased in 90° steps to reduce noise and input ripple, have forward and reverse current limiting, soft­start to limit inrush current during start­up, and short­circuit protection.
The LTC3371 is available from stock in thermally enhanced 38­pin packages: a low profile 5mm x 7mm QFN and TSSOP. E­ and I­grades are specified over an operating junction temperature range of ­40°C to 125°C, and the H­ grade features operation from ­40°C to 150°C. 1000­piece pricing starts at $4.15 each for the E­grade. For more information, visit www.linear.com/product/LTC3371.

Summary of Features: LTC3371

8 x 1A Buck Power Stages Configurable as 2, 3 or 4 Output Channels

8 Unique Output Configurations (1A to

4A Per Channel)

Independent VIN Supplies for Each

DC/DC (2.25V to 5.5V)

Low No Load Supply Current:

15µA in Shutdown (All Channels

Off)

68µA One Channel Active in

Burst Mode® Operation


18µA Per Additional Channel Precision Enable Pin Thresholds for Autonomous Sequencing

1MHz to 3MHz RT Programmable Frequency (2MHz Default) or PLL Synchronization

Temp Monitor Indicates Die Junction

Temperature


CT Programmed Watchdog Timer Independent /RST Pins Indicate When Each Buck Is in Regulation

38­Lead 5mm X 7mm QFN & TSSOP Packages

Configurable 4­Channel 8A Buck DC/DCs Click Photo for High­Res Image

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company's products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and
interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visit
www.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo, Burst Mode and µModule are registered trademarks of
Linear Technology Corp. All other trademarks are the property of their respective owners.

Worldwide Contacts North America and General Information

John Hamburger
Tel: (408) 432­1900 ext. 2419 jhamburger@linear.com
Doug Dickinson
Tel: (408) 432 1900 ext. 2233 ddickinson@linear.com

China (PRC)

Fanny Lau
Tel: 852­2428­0303 flau@linear.com
Angela Ao
Tel: (8610)6522 8081 angela.ao@ebacomms.com

Japan

Yoshikazu Funasaki Tel: 81­3­5226­7291 yfunasaki@linear.com
Takashi Matsuda
Tel: +81­3­3255­8411 linear@chugai­ad.co.jp

Korea

Desiree Park
Tel: +82­2­565­6625 desiree@ezwire.com

Taiwan

Alice Wang
Tel: +886­2­28974705 alice@ezwire.com

Germany

Ralf Stegmann
Tel: +49 (0) 71319234­11 ralf@ezwire.com

UK & Nordic

Alan Timmins
Tel: +44­1252­629937 alan@ezwire.com

Italy

Simona Labianca
Tel: +39 340 0571697 simona@ezwire.com

France

Clotilde Zeller
Tel: +33 1 4614 87 09 clotilde@ezwire.com

This message was distributed by:

TechWire International Incorporated

Global Media Relations for the Electronics Industry

Press Releases ­ Contributed Editorial ­ Media Events

5315 Wirestem Ct ­ Naperville, IL 60564 USA

630.420.8744 ­ www.ezwire.com 0

distributed by