New Products : Separate Controller Bar Type Ionizer / IZT40/41/42
January 28, 2018 at 11:59 pm EST
Share
Product Features
■Space saving Height 37 mm x Width 30 mm
[Attachment]
Height reduced by 57 mm(60%)
[Attachment]
Can be mounted in a narrow space
[Attachment]
■Dual AC Type IZT42 Series (Potential amplitude reduction specification)
[Attachment]
Potential amplitude is reduced with SMC independent Dual AC type sensor.
Static neutralization in consideration of damage to a device which is sensitive to electrostatic discharge (ESD) can be achieved. Potential amplitude applied to the applicable workpiece is reduced even if the workpiece is mounted within close proximity of the ionizer.
[Attachment]
Dual AC type IZT42
Discharges + ions and − ions at the same time to allow the + and − ions to reach the workpiece evenly, thereby reducing the potential amplitude.
[Attachment]
AC type IZT40/IZT41
+ ion and − ion layers reach the workpiece alternately, which increases the potential amplitude.
[Attachment]
Neutralizing static electricity on a glass substrate
[Attachment]
Prevents the breakage of glass substrates due to the static electricity which is generated when the substrate is lifted from the surface plate.
Neutralizing static electricity on an electric substrate
[Attachment]
・Prevents element disruption due to discharge.
・Prevents adhesion of dust.
■AC Type IZT41 Series
With auto balance function
[Attachment]
■Standard Type IZT40 Series
Simple operation: Can be controlled by powering the ionizer ON.
[Attachment]
AC adapter is available.
(AC adapter can only be used for 1 ionizer.)
[Attachment]
■Flexible Layout
The controller and high-voltage power supply module can be mounted separately.
[Attachment]
One controller can control a maximum of 4 ionizers.
[Attachment]
Air supply port is selectable: Right side/left side/both sides
[Attachment]
Bar and cable lengths are selectable.
[Attachment]
■Easier Maintenance
Low maintenance emitter cartridges are used.
Minimizes contamination of emitters by discharging compressed air at the surface of the emitters.
High speed de-ionizing cartridges and energy saving type de-ionizing cartridges are available.
[Attachment]
Easy mounting and removal using connector
Only the bar can be replaced.
[Attachment]
■Safety Functions
Emitter cartridge drop prevention function
Locking by double-action
[Attachment]
Drop prevention cover
Can even more reliably prevent emitter cartridges from dropping off.
[Attachment]
■Models and Functions
[Attachment]
■Accessories (for Individual Parts)
[Attachment]
■Application Examples
[Attachment]
SMC Corporation published this content on 29 January 2018 and is solely responsible for the information contained herein. Distributed by Public, unedited and unaltered, on 29 January 2018 04:59:06 UTC.
Original documenthttp://www.smcworld.com/newproducts/en/izt40/
Public permalinkhttp://www.publicnow.com/view/6739539416DE07CFD338466A4A289824FAA8D20A
SMC Corporation is specialized in the manufacturing and marketing of automatic control equipment. With 12,000 basic products and more than 700,000 variations available, the group offers solutions ranging from air preparation, to measurement, to valves and cylinders covering almost the entire automation process: actuators, sensors, detectors, controllers, filters, fittings and tubing, etc.
At the end of March 2021, SMC Corporation has 38 production sites worldwide.
Net sales are distributed geographically as follows: Japan (27.5%), Asia (40.7%), Europe (16.5%), North America (13.5%) and other (1.8%).
SMC CORPORATION 
