News Release www.linear.com
40VIN, 2.1A Rail-to-Rail LDO+ Now Offered in High Temp, 150°C H-Grade in TSSOP PackageMILPITAS, CA - September 22, 2016 - Linear Technology Corporation announces a new higher temperature "H-grade" version of the LT3086 in the TSSOP package. The LT3086 is part of Linear's feature-rich LDO+™ family, offering significant functionality previously unavailable in linear regulators. The 40V, 2.1A low dropout linear regulator (LDO) includes current monitoring with externally settable current limit and temperature monitoring with external
control of thermal limit temperature. The device includes a programmable power good status flag, cable drop compensation and easy paralleling. The current reference in the LT308x LDO family provides regulation, independent of output voltage.
The LT3086 features a 1.4V to 40V input voltage range. A single resistor programs output voltage from 0.4V to 32V and dropout voltage is only 330mV at 2.1A. The LT3086 achieves line and load regulation of 0.1%, independent of output voltage. The trimmed, precision 50µA current reference is ±1% accurate, providing ±2% output voltage tolerance over line, load and temperature. Output voltage regulation, bandwidth, transient response and noise (40µVRMS) remain independent of output voltage due to the device's unity gain voltage follower architecture.
Unique internal circuitry allows paralleling of multiple LT3086s for higher load current and heat spreading without needing external ballast resistors. Programmable cable drop compensation cancels regulation errors caused by line drops to the load. Output current and temperature monitoring, in addition to a power good flag with programmable threshold, provide system monitoring and diagnostic/debug capability. Internal fault circuitry includes thermal shutdown and current limit with foldback. Thermal limit and current limit are externally programmable. The device's reverse-battery and reverse-current protection add robustness to the end design.
The LT3086HFE adjustable output version is offered in the thermally enhanced TSSOP surface mount package, specified with an operating junction temperature range of -40°C to 150°C. Devices are available from stock and 1,000-piece pricing starts at $3.70 each. For more information, visit www.linear.com/product/LT3086
Photo Caption: 40V 2.1A Low Noise LDO+ in 150°C H-Grade in TSSOP Summary of Features: LT3086Operating Junction Temperature Range: -40°C to 150°C (H-Grade TSSOP Only)
Wide Input Voltage Range: 1.4V to 40V
1 Resistor Sets Output Voltage: 0.4V to 32V
Output Current: 2.1A
±2% Tolerance Over Line, Load & Temperature
Output Current Monitor: IMON = IOUT/1000
Temperature Monitor with Programmable Thermal Limit
Programmable Current Limit
Programmable Cable Drop Compensation
Parallel Multiple Devices for Higher Current
Dropout Voltage: 330mV
1 Capacitor Soft-Starts Output & Decreases Noise
Low Output Noise: 40μVRMS (10Hz to 100kHz)
Precision, Programmable External Current Limit
Power Good Flag with Programmable Threshold
Ceramic Output Capacitors: 10μF Minimum
Quiescent Current in Shutdown:
Reverse-Battery, Reverse-Current Protection
Available in 4mm × 5mm 16-Lead DFN, 16-Lead TSSOP, 7-Lead DD-PAK & 7-Lead TO-220 Packages
The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.
About Linear Technology
Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company's products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visit www.linear.com
, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks and LDO+ is a trademark of Linear Technology Corp. All other trademarks are the property of their respective owners.
Press Contacts: North America / Worldwide UK & NordicJohn Hamburger, Director Marketing Alan Timmins
Communications a.timmins@ntlworld.com
jhamburger@linear.com Tel: +44-1-252-629937
Tel: 408-432-1900 ext 2419
Doug Dickinson, Media Relations Manager ddickinson@linear.com
Tel: 408-432-1900 ext 2233
Linear Technology Corporation published this content on 22 September 2016 and is solely responsible for the information contained herein.
Distributed by Public, unedited and unaltered, on 22 September 2016 15:16:05 UTC.
Original documenthttp://www.linear.com/docs/55671
Public permalinkhttp://www.publicnow.com/view/394EDFA90F55B253C90E81F21FC70E4C4C444935