FOOD

NO. 129/15

On 10 July 2015, the European Commission published Regulation (EU) No 2015/1125 amending Annex to Regulation (EC) No 1881/2006 in regards to maximum levels for polycyclic aromatic hydrocarbons (PAHs) in foodstuffs. The new regulation adds Katsuobushi (dried bonito) and certain smoked herring to a range of foodstuffs where maximum levels of PAHs are set.

Polycyclic aromatic hydrocarbons (PAHs) are a group of environmental pollutants resulting from incomplete combustion of organic matter such as oil, wood, garbage and coal. PAHs are carcinogenic and can occur during food processing such as smoking, roasting, baking, drying and grilling. Maximum levels should both be safe for consumers and set at a level which is as low as reasonably achievable (ALARA), based on good manufacturing, drying and agricultural/fishery practices. Therefore, the EU has set maximum levels of PAHs in foodstuffs via Regulation (EC) No 1881/2006 amended by Regulation (EU) No 835/2011 [1], which added limits for the sum of four PAHs in foodstuffs including adding smoked sprats and canned smoked sprats to the range of foodstuffs.

This latest update, Regulation (EU) No 2015/1125 [2], includes Katsuobushi which is a traditional Japanese food product made from bonito. Its manufacturing process involves filleting, boiling and deboning followed by a smoking/drying process, using wood as the combustion source. Japanese authorities provide evidence to show that despite the application of good smoking practices, lower levels for PAHs are not achievable for Katsuobushi. Therefore, Katsuobushi products are added to the Regulation with maximum levels of PAHs.

Additionally, a product called "Sprotid" which is a traditional product in Estonia, can contain both sprat (Sprattus sprattus) and Baltic herring (Clupea harengus membras) depending on the season and availability. Sprotid needs to be labelled mentioning whether the product contains sprats, or Baltic herring, or a mixture, with the ratio of each fish species present. Due to the fact that both fish are of comparable size and classified as small scale fish, the smoking procedures are the same and consequently levels of PAHs are very similar. Therefore, maximum levels of PAHs in smoked Baltic herring and canned smoked small herring should be set the same as for smoked sprats and canned smoked sprats.

Regarding the information of Katsuobushi and Sprotid, Regulation of PAHs in the annex to Regulation (EC) No 1881/2006 is amended at the point 6.1.6 in section 6 as follows:

table 1

Foodstuffs

Maximum levels (µg/kg)

6.1

Benzo(a)pyrene, benz(a)anthracene, benzo(b)fluoranthene and chrysene

Benzo(a)pyrene

Sum of benzo(a)pyrene, benz(a) anthracene, benzo(b)fluoranthene and chrysene

6.1.6

Smoked sprats and canned smoked sprats (Sprattus sprattus); Smoked Baltic herring ≤ 14 cm length and canned smoked Baltic herring ≤ 14 cm length (Clupea harengus membras); Katsuobushi (dried bonito, Katsuwonus pelamis); bivalve mollusks (fresh, chilled or frozen); heat treated meat and heat treated meat products sold to the final consumer.

5.0

30.0

The new regulation enters into force 20 days after the publishing date.

Food manufacturers, processors and retailers supplying to and/or selling Katsuobushi and smoked herring products within the EU must verify that their products comply with the new regulation.

SGS is committed to keeping you informed of regulation news and developments. Leveraging our global network of laboratories and food experts, SGS provides a comprehensive range of food safety and quality solutions including analytical tests, audits, certifications, inspections, and technical support. We continually invest in our testing, capability, and state-of-the art technology to help you reduce risk, improve food safety and quality. For more information, please visit our website: www.foodsafety.sgs.com.

For enquiries, please contact:

Naovarat Dachprasat
Food Technical Support Center
t: +66 2683 0541 ext 2168

© SGS Group Management SA - 2015- All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties' contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided "as is" and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS's prior written consent.

distributed by