CERAMIL
Sternum
Indication:
Sternum replacement
The implant
The CERAMIL Sternum is a bioceramic. It is a non-‐absorbable inert product. It is designed for use in bone synthesis and intended, by its geometry, for the total or partial replacement of the sternum following a sternectomy.
This implant is equipped with lateral drilling, to be sutured to the costal cartilage.
Material: porous Al2O3 alumina
Biological function
Perfect biocompatibility: Various biological and clinical tests show that there is no alumina release.
Osteoporosis: Its structure with open porosity between 100 and 900 µm promotes bone reehabitation.
Mechanical function
Compression resistance greater than 20 MPa (Maximum chest stress = 0.05 MPa)
Respiratory capacity: Suture binding (followed by bone integration) allows a conservation of chest flexibility so as not to harm respiratory function.
Features
8 different sizes: The anatomical geometry of the sternal implant allows a filling of the resected area respecting the physiology of the ribcage.
NB: The main interest is based on the fact that it is a pre-‐formed implant, requiring no adaptation once the measurement has been carried out, can be installed in the state and implanted for life.
Parc d'Ester Technopole- 1 Rue Columbia | Tel: +33 | (0)5 | 55 69 12 12 | |
87068 Limoges Cedex | www.iceram.fr | Fax: +33 | (0)5 | 55 35 06 50 |
10 14 |
CERAMIL
Sternum
Indication:
Sternum replacement
REFERENCES
Sternum CERAMIL
Reference | Dimensions (Long x Wide x Ep.) |
ST01/3B/T1 | 92,5 x 42 x 6,5 mm |
ST01/3B/T2 | 116,5 x 59,5 x 7 mm |
ST01/3B/T2.5 | 129 x 69,5 x 7.5 mm |
ST01/3B/T3 | 132 x 78 x 8 mm |
ST01/3B/T4 | 163 x 87.5 x 8.5 mm |
ST01/3B/T1-‐H | 57 x 60 x 7 mm |
ST01/3B/T2-‐H | 70 x 75 x 8 mm |
ST01/3B/T3-‐H | 80 x 90 x 8.5 mm |
Sterilization: Gamma radiation between 25-‐40 kGy
Parc d'Ester Technopole - 1 Rue Columbia | Tel: +33 | (0)5 | 55 69 12 12 | |
87068 Limoges Cedex | www.iceram.fr | Fax: +33 | (0)5 | 55 35 06 50 |
10 14 |
Attachments
- Original Link
- Original Document
- Permalink
Disclaimer
I.Ceram SA published this content on 29 June 2023 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 29 June 2023 15:45:25 UTC.