LANXESS has now released a new version of its LewaPlus design software with a significantly expanded range of functions.
The calculation tool, which enables the dimensioning of ion exchange systems including individual process configurations, has been updated with improvements and additions in the modules for mixed-bed calculation, condensate polishing, and the design of polishing stages in food and beverage production. The software also enables users to check the efficiency of existing systems and identify potential savings in operating costs.
Dr.
Design and evaluation of mixed-bed systems
The new functionalities in the water treatment application area include a module for designing mixed-bed systems with ready-to-use mixed bed (MB) resins. The starting point for this was standard mixed beds for which reliable data on operating capacity are available. The module makes it possible to design the filter hydraulics and allows a good estimate of the expected cycle time. As soon as the database is sufficiently accurate for a realistic calculation of the cycle time, high-end mixed beds will also be integrated in a further update.
In addition to designing new systems, LewaPlus now also makes it possible to evaluate existing mixed-bed systems, optimize them, and monitor the performance of the installed resins. The MB-Check module was introduced as a logical next step. It is based on the proven Demi-Check module, a very efficient tool for evaluating the performance of systems by simulating the aging of the installed resins or changes in the composition of the feed water.
Determination of resin performance in condensate polishing applications
When it comes to condensate polishing, the further development of LewaPlus ensures a much more comprehensive calculation of resin performance. The revision of this module includes the following key improvements.
In an arrangement consisting of a strong acid cation exchange (SAC) resin and a downstream mixed-bed stage, the cycle times can be calculated separately. Such a configuration is often used if the raw condensate has a high pH value. The SAC stage removes most of the conditioning agent so that the mixed bed can be operated for a much longer time. The cycle time of the SAC stage can now be set individually, independently of the mixed bed.
The volume ratio of SAC and strong base anion exchange (SBA) resin in the mixed bed can be varied in the range from 1:2 to 2:1. This means that the hydraulic requirements, such as compliance with the recommended minimum height or the maximum specific volume load (BV/h), can be met without having to adjust the safety factor. The actual operating capacity and the theoretical maximum operating capacity are shown.
Furthermore, the calculation of the silica capacity has been revised. In addition to the laboratory data, data from real applications was included in the calculation. This leads to a higher theoretical maximum operating capacity.
Food module expansion
For the first time, LANXESS is offering a feature within LewaPlus that can be used to estimate the use of mixed-bed ion exchange systems to produce the best possible sugar quality. Investment costs and potential savings in operating costs can also be identified. The former include the installation of the system and the procurement of the ion exchange resins. Operating costs include the cost of regeneration and water supply and disposal. With the help of a cost forecast, the user can estimate the costs over the planned total operating life of the system (total cost of ownership, TCO).
As a design tool for the industrial production of aqueous sugar solutions, the LewaPlus FD module helps to dimension new systems and check existing systems. To complete the portfolio of ion exchange processes for the food and beverage industry, LANXESS has expanded the existing module for corresponding applications. It is now also possible to design mixed-bed systems that are used as a polishing stage for sugar solutions in the production of high-purity sugar. Such sugar-containing solutions are either a component of end products that are produced from starch in a multi-stage process, for example glucose, dextrose or concentrated fructose syrup, or a liquid sugar obtained from sugar cane or sugar beet.
Detailed information about LewaPlus and LPT products and services can be found at https://lanxess.com/en/Products-and-Brands/Brands/Lewatit. The new version of the design software is now available for download here and can be used free of charge.
ABOUT LANXESS
LANXESS is a leading specialty chemicals company with sales of
FORWARD-LOOKING STATEMENTS
This company release contains certain forward-looking statements, including assumptions, opinions, expectations and views of the company or cited from third party sources. Various known and unknown risks, uncertainties and other factors could cause the actual results, financial position, development or performance of
Contact
Tel: +49 221 8885 5041
Email: michael.fahrig@lanxess.com
(C) 2024 Electronic News Publishing, source