SAN DIEGO, Aug. 26, 2014 /PRNewswire/ -- Peregrine Semiconductor Corp. (NASDAQ: PSMI), founder of RF SOI (silicon on insulator) and pioneer of advanced RF solutions, introduces the UltraCMOS® PE42424 high-isolation, SPDT switch optimized for 802.11ac carrier and enterprise Wi-Fi access points. Successor to last year's groundbreaking PE42423, the upgraded switch is 75 percent smaller and features a 60-percent increase in power handling and a 350-percent faster switching speed. The PE42424 is ideally suited for transmit/receive switching applications for outdoor Wi-Fi access points that require high power handling and rugged, high-temperature performance. Peregrine's RF switch enables these WLAN products to realize the promise of 802.11ac, which is offering high data throughput in increasingly dense, bring-your-own-device (BYOD) environments.

"Wi-Fi is by far the cheapest way to deliver mobile data, so, at a worldwide level, the deployment of Wi-Fi access points is accelerating," says Joe Madden, founder and principal analyst at Mobile Experts. "More than 1.8 million 802.11ac access points will be deployed next year, including both indoor and outdoor applications. In addition, most indoor small cells will also include Wi-Fi access-point hardware for seamless integration of Wi-Fi with mobile services. The wide bandwidth, high power and demanding linearity requirements of these access points drives a strong need for higher RF-component performance."

Carriers have been experiencing an exponential increase in mobile data traffic. To provide consistent quality of service, they are offloading this traffic to Wi-Fi networks, which are increasingly integrating 802.11ac into their small cells. Indoor units (IDUs) were the first Wi-Fi access points to adopt the 802.11ac standard, and Peregrine's inaugural Wi-Fi switch, the PE42423, was optimized for high performance within those devices. Today, outdoor unit (ODU) Wi-Fi access points are quickly adopting the 802.11ac standard, and their performance and environmental requirements are much more intensive. Peregrine developed the PE42424 to meet these specific 802.11ac-based ODU access point needs:


    --  High power handling of 8W to accommodate the higher transmit power of
        the access-point radios
    --  Fast switching speed of 145 ns to enable higher throughput and data
        rates in high-density, BYOD environments
    --  High port-to-port isolation to reduce signal leakage between transmit
        and receive paths
    --  Temperature support up to 105 degrees Celsius to withstand harsh
        environments and to reduce thermal constraints
    --  Small 1.5x1.5 mm footprint to reduce board area and offer engineers more
        design options for other functions

"Peregrine is extending its Wi-Fi RF switch line to address the tough challenges faced by designers of next-generation 802.11ac access points," says Kinana Hussain, senior marketing manager. "Our UltraCMOS technology and patented design techniques preserve the unmatched isolation performance of PE42424's predecessor while increasing the power-handling capability, improving switching speeds and reducing the form factor."

Peregrine's PE42424 supports the latest carrier-grade, Wi-Fi device demands with additional features, including:


    --  High linearity of 61 dBm IIP3 over the entire power-supply range; this
        capability enables system designs with lower supply rails and prevents
        linearity degradation through maximum power levels
    --  High ESD rating of 2500V (on RF pins) that increases product reliability
        and eases manufacturing flow
    --  Smaller switch footprint that eliminates the need for external
        components, such as DC blocking capacitors
    --  Control logic support for 1.8V and 3.3V and wide power supply range from
        2.3V to 5.5V that provides design flexibility

Features, Packaging, Pricing and Availability
 Peregrine's PE42424 is a Single-Pole Double Throw (SPDT) RF switch featuring fast switching time (145 ns with a 125 kHz switching rate) and exceptional isolation (48 dB at 2.4 GHz and 35 dB at 6 GHz). The 50-ohm absorptive switch supports +1.8V standard logic control and provides stable RF performance over a power supply range between 2.3V and 5.5V. Samples, evaluation kits and volume-production parts are available now. Offered a RoHS compliant, 6-lead, 1.5x1.5 mm QFN package, the PE42424 is $0.49 each for 10K-quantity orders and $0.44 for 25K-quantity orders. View the press kit for images, video and datasheet.



    Product Specification
    ---------------------

    Peregrine's PE42424 UltraCMOS(R) 50 ohm
     SPDT Wi-Fi RF Switch

    100 MHz to 6 GHz
    ----------------

    Features:
    ---------

    802.11 a/b/g/n/ac support
    -------------------------

    Wide power-supply range between 2.3V and
     5.5V
    ----------------------------------------

    +1.8V control logic compatible
    ------------------------------

    105 degrees C operating temperature
    -----------------------------------

    Exceptional isolation


    48 dB @ 2.4 GHz 
    35 dB @ 6 GHz
     ------------------------------

    High linearity across supply range


    IIP3 of 61 dBm 
    IIP2 of 125 dBm
     -------------------------------

    High power handling


    30 dBm CW 
    39 dBm Pulsed
     ------------------------

    Fast switching:

     145 ns switching time 
    125 kHz switching
      rate
     ----------------------------------------

    ESD performance

     2500V HBM on RF pins to GND 
    1000V CDM on
      all pins
     -----------------------------------------

USE OF FORWARD-LOOKING STATEMENTS
This press release contains forward-looking statements regarding our management's future expectations, beliefs, intentions, goals, strategies, plans and prospects. Such statements constitute "forward-looking" statements, which are subject to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The achievement of the matters covered by such forward-looking statements involves risks, uncertainties and assumptions. If any of these risks or uncertainties materialize, or if any of the assumptions prove incorrect, our actual results, performance or achievements could be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Such risks and uncertainties include, but are not limited to, our dependence on a limited number of customers for a substantial portion of our revenues; intellectual property risks; intense competition in our industry; our ability to develop and introduce new and enhanced products on a timely basis and achieve market acceptance of those products; consumer acceptance of our customers' products that incorporate our solutions; our lack of long-term supply contracts and dependence on limited sources of supply; and potential decreases in average selling prices for our products.

For further information regarding risks and uncertainties associated with Peregrine's business, please refer to the filings that we make with the Securities and Exchange Commission from time to time, including those set forth in the section entitled "Risk Factors" in our Form 10-K for the year ended December 28, 2013, which should be read in conjunction with these financial results. These documents are available on the SEC Filings section of the Investor Relations section of our website at http://investors.psemi.com/. Please also note that forward-looking statements represent our management's beliefs and assumptions only as of the date of this press release. Except as required by law, we assume no obligation to update these forward-looking statements publicly, or to update the reasons actual results could differ materially from those anticipated in the forward-looking statements, even if new information, becomes available in the future.

ABOUT PEREGRINE SEMICONDUCTOR
Peregrine Semiconductor (NASDAQ: PSMI), founder of RF SOI (silicon on insulator), is a leading fabless provider of high-performance, integrated RF solutions. Since 1988 Peregrine and its founding team have been perfecting UltraCMOS® technology - a patented, advanced form of SOI - to deliver the performance edge needed to solve the RF market's biggest challenges, such as linearity. With products that deliver best-in-class performance and monolithic integration, Peregrine is the trusted choice for market leaders in automotive, broadband, industrial, Internet of Things, military, mobile devices, smartphones, space, test-and-measurement equipment and wireless infrastructure. Peregrine holds more than 180 filed and pending patents and has shipped more than 2 billion UltraCMOS units. For more information, visit http://www.psemi.com.

The Peregrine Semiconductor name, logo, and UltraCMOS are registered trademarks of Peregrine Semiconductor Corporation in the U.S.A., and other countries. All other trademarks mentioned herein are the property of their respective owners.

Editorial Contact:
 Elizabeth Brown
Peregrine Semiconductor
Phone: 619.993.4648
pr@psemi.com

Related Links
Press Kit
Product Page
Datasheet

http://photos.prnewswire.com/prnvar/20140825/139485

http://photos.prnewswire.com/prnvar/20140825/139486

http://photos.prnewswire.com/prnvar/20140818/136921

Video - http://origin-qps.onstreammedia.com/origin/multivu_archive/PRNA/ENR/FX-MM97415-20140826-1.mp4
Photo - http://photos.prnewswire.com/prnh/20140825/139485
Photo - http://photos.prnewswire.com/prnh/20140825/139486
Logo - http://photos.prnewswire.com/prnh/20140818/136921

SOURCE Peregrine Semiconductor