3.3V, 15A TVS Diode Arrays from Littelfuse Provide Lower Capacitance, Higher Power Handling Capability than Other Solutions Most robust surge rating in the smallest footprint (≥40 percent smaller than other solutions)

SP3312T Series TVS Diode Array High Resolution Image (click here)

CHICAGO, July 7, 2015 - Littelfuse, Inc., the global leader in circuit protection, has introduced the SP3312T Series 3.3V, 15A TVS Diode Array (SPA® Diodes), which integrates four channels (two differential pairs) of low capacitance diodes to protect sensitive I/O pins from damage due to lightning-induced surge events and electrostatic discharge (ESD). When compared to similar market solutions, the SP3312T Series provides circuit designers with 71 percent lower capacitance solution than other devices, which helps preserve signal integrity and minimize data loss. It also provides up to 150 percent higher power handling capacity than competing solutions. This robust device can safely absorb up to 15A per IEC 61000-4-5 (tp=8/20μs) without performance degradation and a minimum ±30kV ESD per IEC 61000-4-2.

Targeted applications include 10/100/1000 Ethernet, LAN/WAN equipment, home automation and security, which benefits from the SP3312T superior clamping performance in a space-saving 2.0 x 1.0mm μDFN-08 package with a typical height of 0.40mm Ultra fast acting silicon-based ESD protection, designed to shunt transient voltage events at a level just above standard operating voltages provides a superior choice when compared to existing solutions.

"The SP3312T Series offers a compelling alternative to other market solutions for ESD and surge protection on gigabyte Ethernet ports," said Tim Micun, product manager for the TVS Diode Arrays line. "Their extremely low capacitance allows greater flexibility in printed circuit board design and simplifies compliance with the industry's go/no-go eye diagram testing, which helps take the worry out of protecting gigabyte interfaces."

All SP3312T Series TVS Diode Arrays offer these key benefits:
• Excellent surge protection with a peak pulse power rating of 250W. Compared to similar market solutions, the SP3312T Series offers far more overhead to electrical threats defined by regulatory standards.
• Negligible variability in capacitance over the operating voltage range allows for improved signal integrity of the lines the device is protecting, as well as less eye diagram degradation when compared with competing solutions.
• 15A peak current ESD protection allows manufacturers to claim ESD protection above the maximum level stated in the IEC standard and protects against a multitude of other threats to ensure product reliability in the field.
• Small form factor µDFN-08 package (1.8x2.0x0.554mm) allows straight-through routing, so the PCB trace can be routed beneath the device without the need for stub traces that can cause signal degradation.

Availability
The SP3312T Series is packaged in a small form factor µDFN-08 package and is provided in tape & reel form in quantities of 3,000. Sample requests can be placed through authorized Littelfuse distributors worldwide. For a listing of Littelfuse distributors, please visit Littelfuse.com.

For More Information
Additional information is available on the SP3312T Series product page and datasheet. If you have technical questions, please contact: Tim Micun, Product Manager, TVS Diode Arrays, tmicun@littelfuse.com.

Media Contact
Rhonda Stratton
Global Marketing Communications Manager
Electronics Business Unit
rstratton@littelfuse.com
1-773-628-0644

About Littelfuse
Founded in 1927, Littelfuse is the world leader in circuit protection with growing global platforms in power control and sensing. The company serves global customers in the electronics, automotive and industrial markets with technologies including fuses, semiconductors, polymers, ceramics, relays and sensors. Littelfuse has over 8,000 employees in more than 35 locations throughout the Americas, Europe and Asia.littelfuse.com.


LFUS-P
distributed by