New Products : 3-Screen Display High-Precision Digital Pressure Switch / ZSE20□(F)/ISE20□
October 26, 2017 at 02:54 am EDT
Share
Product Features
■Setting is possible while checking the measured value.
[Attachment]
■Delay Time : 1.5 ms or less
* 1 Select from 1.5 ms or less, 20 ms, 100 ms, 500 ms, 1000 ms, 2000 ms, or 5000 ms.
■Current Consumption : 25 mA or less
* 2 Further reduced by approx. 60% in power-saving mode (For 20 series)
■The 20A, 20B, and 20C series have been added to the product lineup.
[Attachment]
■Improved Operability
● Visualization of Settings
The sub screen (label) shows the item to be set.
[Attachment]
● Simple 3-Step Settings
When the S button is pressed and the set value (P_1) is being displayed, the set value (threshold value) can be set.
When the S button is pressed and the hysteresis (H_1) is being displayed, the hysteresis value can be set.
[Attachment]
● Now with a snap shot function for set value reading
[Attachment]
● Easy Screen Switching It is possible to change the settings while checking the measured value.
[Attachment]
● 3 Setting Modes Select the setting mode that best meets your needs.
[Attachment]
● Other Sub Screen Display
The peak value or bottom value, or both values can be displayed on one screen!
* Peak and bottom values are maintained even if the power supply is cut.
[Attachment]
■Convenient Functions
[Attachment]
■Compact & Lightweight
[Attachment]
■Improved Installability
Connector type Wiring is possible after piping has been connected.
[Attachment]
■Mounting
The bracket configuration allows for mounting in four orientations.
[Attachment]
■For General Fluids ZSE20C(F)/ISE20C(H)
● Stainless diaphragm
[Attachment] Oil-free (Single-layer diaphragm structure)
Sensor unit: Stainless steel 630 Fitting parts: Stainless steel 304
A stainless steel 316L option is also available for the sensor unit and fitting parts.
● Enclosure: IP65
● Leakage
1×10Pa・m/s
1×10Pa・m/s
● Welded structure for sensor units and fitting parts
Select from a face seal or compression fitting.
[Attachment]
● Applicable Fluid Examples
Water
Hydraulic fluid (JIS-K2213)
Silicone oil (JIS-K2213)
Lubricant (JIS-K6301)
Fluorocarbon
Argon
Carbon dioxide
Air-containing drainage
Nitrogen
SMC Corporation published this content on 26 October 2017 and is solely responsible for the information contained herein. Distributed by Public, unedited and unaltered, on 26 October 2017 06:53:06 UTC.
Original documenthttp://www.smcworld.com/newproducts/en/zse20/
Public permalinkhttp://www.publicnow.com/view/0CBE2D907D218D982CDFD32172A14F1D66E362AD
SMC Corporation is specialized in the manufacturing and marketing of automatic control equipment. With 12,000 basic products and more than 700,000 variations available, the group offers solutions ranging from air preparation, to measurement, to valves and cylinders covering almost the entire automation process: actuators, sensors, detectors, controllers, filters, fittings and tubing, etc.
At the end of March 2021, SMC Corporation has 38 production sites worldwide.
Net sales are distributed geographically as follows: Japan (27.5%), Asia (40.7%), Europe (16.5%), North America (13.5%) and other (1.8%).