Panex Resources Inc. announced that it has commenced drilling on the highly prospective Matala Gold Project in the South Kivu Province, DRC. The Matala Gold Project is located at the southwestern end of the world renowned Twangiza-Namoya Gold corridor where Banro Corporation has defined to date, more than 17 Million Ounces ("Moz") of gold resources from four deposits adjacent to the Matala project area. The main drill target, Kanana, located within the Matala Gold Project, has the same geological setting as Banro's 8.6Moz Twangiza and 5.6Moz Lugushwa gold deposits. Drill hole KANDD001 has been drilled to a depth 72m and has a planned depth of 300m. The current hole is targeting the fold hinge zone of a major antiform defined from airborne geophysics and mapping with an associated soil anomaly which extends over 3,000m and has a width of) 600m. The first batch of drill samples are expected to be sent to ALS Chemex laboratory in Johannesburg before the end of September 2016 with first results expected before end October 2016. Three km gold in soil anomaly at Kanana, Matala Project, showing trench results and location of drill hole KAN001. The Matala Gold Project comprises 14 exploration permits for 1,967sqkm on the north-western edge of the Kibaran Belt, an intracontinental mobile belt located between the Congo and Tanzania cratons. The Kibaran belt and adjacent Tanzanian Craton host more than 70Moz of gold resources, currently being mined by Banro, AngloGold Ashanti, Barrick and Barra, and is well renowned as a gold province. Panex's initial focus will be to drill the high priority Kanana Prospect where channel sampling has identified high grade gold mineralisation along the fold axis of a major antiform, similar to that which hosts both the Twangiza and Lugushwa deposits. Historic channel sampling across a 3,000M long gold-in-soil anomaly at Kanana returned a number of significant results including: //st 17m @ 2.51g/t Au 6m @ 2.55g/t Au 12m @ 3.03g/t Au 6m @ 4.37g/t Au 2m @ 12.95g/t Au. Panex has contracted International Drilling Services SARL from Goma, DRC, to drill 5 diamond drill holes for 1,500m aimed at testing the mineralised fold axis over 1,100m of strike. The drill collars are positioned approximately 400m apart over the highest grade portion of the gold-in-soil and channel sampling anomaly. Holes will be drilled at -50 degrees towards the southwest across the fold axis of the northwest trending Kanana anticline. Drilling is expected to intercept multiple zones of high-grade gold mineralised quartz veins, several metres wide, surrounded by broader, low to moderate grade disseminated sulphide quartz stock work zones tens of metres wide, across the fold axis. Historic exploration across the Matala Project undertaken by Afrimines in 2010, identified numerous geochemical anomalies (5 gold, 1 tin) which formed the basis of follow-up regional exploration undertaken by Regal Resources Ltd. between 2011 and 2014 (in a joint venture with Afrimines). Regal's exploration focused on the two priority targets, Ngoy and Matala, with 51 holes drilled at Ngoy for 8,768m of diamond core and a JORC 2012 compliant Inferred Mineral Resource of 2 million tonnes ("Mt") at 3.3g/t gold ("Au") for 213,000oz Au, estimated by CSA Global, Perth, Western Australia. Exploration at the Matala Project consisted of soil, rock chip, geological mapping and channel sampling. Kanana was advanced to the drilling stage following the delineation of a 3,000m long gold-in-soil anomaly ()100ppb Au) and in-situ, high-grade channel sample results, coinciding with the fold axis of a positively identified anticline. The anticline is interpreted to outcrop in the southeast and to gently plunge towards the northwest. Regal withdrew from the joint venture in 2015 to focus on a copper project in the Katanga Province in DRC. The highly prospective Kanana Prospect has not yet been drill tested. Two styles on mineralisation have been identified at Kanana from historical channel sampling and geological mapping, both being associated with intense silica alteration. These are: - brecciated, ferruginous quartz veining (10cm up to 5m wide containing (1% pyrite. The veins are generally aligned to sediment layering and foliation in outcrop (quartz vein-hosted gold mineralisation). - strongly silicified, foliated, schists containing 1 to 5% pyrite commonly containing bedding parallel quartz veins 1mm to 5mm thick (disseminated and stock work vein-hosted gold mineralisation). The potential of known gold mineral occurrences within the remainder of the Matala Gold Project, including the mineral resource at Ngoy, will be further evaluated should results from the initial drilling at Kanana confirm the potential for discovery of significant gold mineralisation.