Advanced X-ray Residual stress measurement system!
Added new model 'μ-X360s' that is the world's lightest and smallest Residual stress analyzer.
This is non-destructive measurement system for residual stress, retained austenite, FWHM based on X-ray diffraction technique, and excellent for portability, reliablity, safety, operability, cost and etc.
1. Portability
• The world's lightest and smallest.
• Able to measure in pipes with internal diameters down to 170mm wide.
• Easy to carry anywhere.
2. Measurement speed
• 60 secs / measurement point.
3. Reliability
• Reliable measurement by cos α method.
• Easy position setting by single incident angle measurement.
• Detecting 500 points data from the complete Debye ring.
• High repeatability.
4. Safety
• Low operational power 30KV & 1.5mA.
• Scattered X-ray radiation is same level as nature level when 3 meters away from the sensor unit. (in use with standard collimator)
• Simple air cooling system.
5. Operability
• Easy operation.
• Easy sample positioning.
6. Certification of standard
7. X-ray tube exchange
• Possible to exchange the tube by customer. 5 types of X-ray tubes, 'Cr, V, Cu, Co, and Mn' are available.
• Plastic forming. (Rolling, pressing, molding)
• Thermal treatment. (Quenching, annealing, sub-zero treatment)
• Surface reformation. (Shot peening, shot blasting, laser shot peening)
• Metallic processing. (Welding, cutting, grinding)
• Maintenance of plant and infrastructure. (Stress corrosion cracking, monitoring aging effects)
Industrial components
Field measurement
Collimator size
Standard: Φ1.0mm
(Illuminated surface: approx. Φ2.0mm)
Maximum measurement distance
(for Ferrite samples)
X-ray tube voltage & current
Cr / Co / Cu / V / Mn
Possible to exchange the X-ray tube by customer
Measurement method
Single incident angle method
(cos α method)
Measurement item
Residual stress / FWHM /
Retained austenite (optional)
Target material
Ferrite, aluminum, nickel, titanium, ceramics and etc.
Weight
Sensor unit: approx. 2.4kg
Power supply unit: approx. 6.2kg
Sensor unit / Power supply unit Size
Sensor unit: W114 × H107 × D213 (mm)
Power supply unit: W159 × H235× D289 (mm)
Measurement time
60 secs / measurement point
Gyro sensor
Display the sensor unit angle
Standard and optional customized cabinets are available.
Catalog Download.
• If you have any inquiries, such as demonstration / test measurement, please contact us from the link below.
• If you need measurement service and rental service, please contact us from the link below.
• Contact form



Pulstec Industrial Co. Ltd. published this content on 31 October 2016 and is solely responsible for the information contained herein.
Distributed by Public, unedited and unaltered, on 31 October 2016 08:42:04 UTC.

Original documenthttp://www.pulstec.co.jp/en/pr/xray/pr_x01.html

Public permalinkhttp://www.publicnow.com/view/859CFF5747CB378965D518BCF8092437125190D9