World Copper Ltd. ('World Copper' or the 'Company'; TSXV: WCU, OTCQX: WCUFF) announces the results of an updated mineral resource estimate for the Zonia copper-oxide deposit in Arizona, USA ('Zonia' or the 'Project').
The updated mineral resource estimate includes 75.7 million short tons grading 0.30% total-copper (Indicated Resources) containing 450.5 million pounds of copper and 122.0 million short tons grading 0.24% total-copper (Inferred Resources) containing 575.4 million pounds of copper (the Updated Resource Estimate'), which is a significant expansion of the Historical Resource Estimate (as defined below).
CEO Nolan Peterson states: 'The Updated Resource Estimate for Zonia is a critical first milestone since World Copper's acquisition of the project, representing our best understanding of the resource as it is, and an expansion over past resources. As we advance the project on the engineering front, we will simultaneously aim to expand the resource even further by targeting the high potential Zonia Norte target northeast of the main resource deposit. Zonia is a key component of our development portfolio, and we look forward to continued positive developments at the site.
Indicated Resources of 75.7 million short tons grading 0.30% total-copper containing 450.5 million pounds of copper and Inferred Resources of 122.0 million short tons grading 0.24% total-copper containing 575.4 million pounds of copper.
Low strip ratio of 0.8:1 waste to mineralized material in base case mineral resource estimate.
Significant expansion of the Zonia resource estimate compared to the Historical Resource Estimate.
Zonia Norte confirmed as next exploration target at the Project.
Estimation Methodology in Detail
The Updated Resource Estimate was completed in a manner consistent with the 'CIM Estimation of Mineral Resources & Mineral Reserves Best Practice Guidelines' adopted by CIM Council on November 29, 2019, and the mineral resources are classified in accordance with 'CIM Definition Standards for Mineral Resources and Mineral Reserves', prepared by the CIM Standing Committee on Reserve Definitions and adopted by CIM Council on May 10, 2014 ('CIM Standards'). Classification of the resources reflects the relative confidence of the grade estimates. Mr. Schwering estimated the mineral resources for the Project based on wireframe modeling and to a maximum search distance of 960 feet using an ordinary kriging interpolant. Geostatistics and mineral resource estimation were done with Leapfrog EDGE. Three-dimensional wireframes and model visualization was done with Leapfrog Geo software, and the mineral resources were constrained with a Lerch-Grossman pit optimization. The metal of interest at the Project is copper, and the effective date of the Updated Resource Estimate is September 1, 2022.
A variable copper cut-off was chosen for reporting the Updated Resource Estimate based on the oxidation model. The cut-off grade for blocks was calculated based on the following assumptions: a long-term copper price of US$3.60/lb., assumed combined operating ore costs of US$6.25/ton (handling, process, and general and administrative costs), refining & shipping costs of US$0.05/lb. of copper, and copper metallurgical recoveries of 73% for blocks coded as oxide and 70% for blocks coded as transition.
Mineral resources that are not mineral reserves do not have demonstrated economic viability and may be materially affected by modifying factors including but not restricted to mining, processing, metallurgical, infrastructure, economic, marketing, legal, environmental, social and governmental factors. Inferred Mineral Resources are that part of the mineral resource for which quantity and grade, or quality are estimated based on limited geologic evidence and sampling, which is sufficient to imply but not verify grade or quality continuity. Inferred Mineral Resources may not be converted to mineral reserves. It is reasonably expected, though not guaranteed, that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.
Data verification efforts for the Updated Resource Estimate carried out by HRC included discussions with World Copper personnel, personal inspection of the Project area with the collection and submission of check samples to an external laboratory, a mechanical audit of the exploration drillhole database received from World Copper, and a detailed review of additional information obtained from historical reports and information provided by the Company. HRC also completed a partial validation of the database geologic information as compared to the paper logs, and a partial validation of the assay values contained in the exploration database as compared to assay certificates provided by World Copper. A statistical analysis was also completed on 46 twinned drill holes completed by previous operators.
A technical report to support the Updated Resource Estimate for the Project, prepared in accordance with NI 43-101, will be filed on SEDAR (www.sedar.com) within 45 days of this news release.
Comparison to Historical Resource Estimate
Cardero Resource Corp. filed a technical report on SEDAR entitled 'Preliminary Economic Assessment, NI 43-101 Technical Report Zonia Copper Project Yavapai County, Arizona, USA', which report was prepared by Global Resource Engineering with an Effective Date of March 22, 2018, and an Issue Date of April 17, 2018 (the 'PEA'). The historical mineral resource estimate used for the PEA (the 'Historical Resource Estimate') was prepared in accordance with the requirements of NI 43-101 with an effective date of November 30, 2015. The qualified person for the Historical Resource Estimate was Rex C. Bryan of Tetra Tech Inc. Total copper grades were estimated for the Project using an ordinary kriging algorithm based on three-dimensional wireframe modeling and a maximum search distance of 600 feet. Three-dimensional wireframes and model visualization was done with GemCom software. Geostatistics and resource estimation was done with MicroModel. Additional statistical analysis was done with Statistica, and Excel. The Historical Resource Estimate was stated within a Lerch-Grossman optimized pit shell and met the test of reasonable prospects for economic extraction using the following parameters: a metal price of $2.50/lb. copper, mining costs of $1.50/ton, processing costs of $3.40/ton, general and administrative costs of $0.45/ton, oxide recovery of 73%, transition zone recovery of 70% and an average pit slope of 45 degrees.
The Historical Resource Estimate was classified as Measured, Indicated, and Inferred in accordance with CIM Standards. The Historical Resource Estimate is superseded by the Updated Resource Estimate disclosed by the Company in this news release.
PDAC CONFERENCE
World Copper is participating in the PDAC 2023 Conference in Toronto, Ontario from March 5-8, 2023 at The Metro Toronto Convention Centre. World Copper will be in booth 3139 at the Investors Exchange. Team members will be available to answer questions. Interested parties that wish to schedule a meeting, or who would like more information regarding the conference and events noted above, please contact Michael Pound at (604) 638-3287, or email mpound@worldcopperltd.com. Corporate presentation and fact sheet information materials are available on the Company's website at www.worldcopperltd.com.
ABOUT ZONIA
Zonia is in the Walnut Grove Mining District, Yavapai County, Arizona, and consists of 261 patented (96) and unpatented (185) mineral claims, and 566.85 acres of surface rights acquired from the State of Arizona, all totaling 4,279.55 acres.
Zonia is a near-surface, copper-oxide resource and a brownfields site having already been mined in the late 1960s and '70s. The project has been significantly de-risked with over 50,000 metres of drilling completed to date and with substantial amounts of detailed engineering completed. The PEA based on the Historical Resource Estimate indicated that the project could be advanced utilizing low-cost open pit mining and heap leach with SX-EW processing to produce pure copper cathode (a copy of the PEA technical report is available on Cardero's SEDAR profile at www.sedar.com).
Zonia was pre-stripped during mining in the late 1960s and 1970s so that, as described in the PEA, the strip ratio is a low 1:1. Furthermore, the PEA outlines a mine plan and development strategy entirely on private land, which significantly reduces the timeline for permitting. At a copper price of $3.00/lb., Zonia shows an after-tax NPV@6% of $225 million, and an internal rate of return ('IRR') of 29.0%.
The PEA is preliminary in nature, it includes Inferred Mineral Resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and, as such, there is no certainty that the PEA results will be realized. Mineral resources are not mineral reserves and do not have demonstrated economic viability as there is no certainty that all or any part of the resources will be converted into reserves.
In addition to the established resource, the Zonia land position contains a copper-molybdenum geochemical anomaly (associated with depressed manganese values) that is similar in intensity and scale (1000 by 1500 metres) to the main resource, and within the same prospective geology. This anomaly is located two kilometres northeast of the resource and represents a high-priority copper-oxide porphyry exploration drill target.
ABOUT WORLD COPPER LTD.
World Copper Ltd., headquartered in Vancouver, BC, is a Canadian resource company focused on the exploration and development of its copper porphyry projects: Escalones and Cristal in Chile, and Zonia in Arizona. Two of these projects have estimated resources with significant soluble copper mineralization, and there are at least two other copper porphyry targets with exciting potential to expand the resource base.
Contact:
Tel: 604-638-3287
Email: info@worldcopperltd.com
Cautionary Note Regarding Forward-Looking Statements
This news release contains forward-looking statements and forward-looking information (collectively, 'forward-looking statements') within the meaning of applicable Canadian and U.S. securities legislation. All statements, other than statements of historical fact, included herein including, without limitation, statements with respect to anticipated exploration program results from exploration activities (including the expansion of the Updated Resource Estimate), the filing of a technical report for the Updated Resource Estimate, the discovery and delineation of mineral deposits/resources/reserves and the anticipated business plans and timing of future activities of World Copper are forward-looking statements. Although World Copper believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are typically identified by words such as: 'believes', 'expects', 'anticipates', 'intends', 'estimates', 'plans', 'may', 'should', 'would', 'will', 'potential', 'scheduled' or variations of such words and phrases and similar expressions, which, by their nature, refer to future events or results that may, could, would, might or will occur or be taken or achieved. In making the forward-looking statements in this news release, World Copper has applied several material assumptions, including without limitation,, market fundamentals will result in sustained copper demand and prices, the receipt of any necessary permits, licenses and regulatory approvals in connection with the future development of Zonia in a timely manner, the availability of financing on suitable terms for the development, construction and continued operation of World Copper's projects and its ability to comply with environmental, health and safety laws.
Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of World Copper to differ materially from any future results, performance or achievements expressed or implied by the forward-looking information. Such risks and other factors include, among others, operating and technical difficulties in connection with mineral exploration and development activities, actual results of exploration activities, including on Zonia, the estimation or realization of mineral reserves and mineral resources, the timing and amount of estimated future production, the costs of production, capital expenditures, the costs and timing of the development of new deposits, requirements for additional capital, future prices of copper, changes in general economic conditions, changes in the financial markets and in the demand and market price for commodities, lack of investor interest in future financings, accidents, labour disputes and other risks of the mining industry, delays in obtaining governmental approvals, permits or financing or in the completion of development or construction activities, risks relating to epidemics or pandemics such as COVID-19, including the impact of COVID-19 on World Copper's business, financial condition and results of operations, changes in laws, regulations and policies affecting mining operations, title disputes, the inability of World Copper to obtain any necessary permits, consents, approvals or authorizations, the timing and possible outcome of any pending litigation, environmental issues and liabilities, and risks related to joint venture operations, and other risks and uncertainties disclosed in World Copper's continuous disclosure documents. All of World Copper's Canadian public disclosure filings may be accessed via www.sedar.com and readers are urged to review these materials.
Readers are cautioned not to place undue reliance on forward-looking statements. World Copper does not undertake any obligation to update any of the forward-looking statements in this news release or incorporated by reference herein, except as otherwise required by law.
Cautionary Note to United States Investors
World Copper prepares its disclosure in accordance with the requirements of securities laws in effect in Canada, which differ from the requirements of U.S. securities laws. Terms relating to mineral resources in this news release are defined in accordance with NI 43-101 under the guidelines set out in CIM Standards. The U.S. Securities and Exchange Commission (the 'SEC') has adopted amendments effective February 25, 2019 (the 'SEC Modernization Rules') to its disclosure rules to modernize the mineral property disclosure requirements for issuers whose securities are registered with the SEC under the U.S. Securities Exchange Act of 1934.
As a result of the adoption of the SEC Modernization Rules, the SEC will now recognize estimates of 'measured mineral resources', 'indicated mineral resources' and 'inferred mineral resources', which are defined in substantially similar terms to the corresponding CIM Standards. In addition, the SEC has amended its definitions of 'proven mineral reserves' and 'probable mineral reserves' to be substantially similar to the corresponding CIM Standards.
U.S. investors are cautioned that while the foregoing terms are 'substantially similar' to corresponding definitions under the CIM Standards, there are differences in the definitions under the SEC Modernization Rules and the CIM Standards. Accordingly, there is no assurance any mineral resources that World Copper may report as 'measured mineral resources', 'indicated mineral resources' and 'inferred mineral resources' under NI 43-101 would be the same had World Copper prepared the resource estimates under the standards adopted under the SEC Modernization Rules.
WORLD COPPER LTD. 
