North Arrow Minerals Inc. reported prospecting results from the MK1 spodumene pegmatite, within North Arrow's recently acquired 100% owned MacKay Lithium Project, Northwest Territories. The property is well located, immediately adjacent to the winter road connecting the city of Yellowknife with the Lac de Gras diamond mines. Four grab samples, ranging in weight from 0.45 kg to 2.06 kg, have returned 2.45%, 2.51%, 2.76% and 3.74% Li2O.

The samples were collected in June 2023 during initial prospecting of the property. They were intended as a first pass evaluation of spodumene mineralization within the pegmatite and should not be considered representative. The samples contained visual spodumene crystals ranging from 2 cm to 4 cm in length and were collected at four locations over a 120m strike length of the pegmatite.

Photos of the pegmatite exposures and spodumene mineralized samples can be found here. Follow up mapping of the pegmatite was completed in mid-July and indicates that MK1 consists of a series of irregular sub-parallel pegmatite dykes ranging from 0.5m to >10m wide over a combined width of up to 150m and traced over an interpreted strike extent of greater than 400m. Interpretations are based on low relief bedrock exposures, with significant overburden coverage providing scope for expanding the pegmatite along strike.

Rock sawn channel samples have now been collected from MK1 and submitted to ALS Global in Yellowknife for analysis. Sample preparation and analytical work reported herein were carried out by ALS Global. Samples were prepared using ALS method CRU31 (crushing to 70% passing through a 2 mm screen), SPL-21 (riffle split of 250g), and PUL-31 (pulverize up to 85% passing through a 75-micron screen).

A 0.2g subsample of the pulverized material was analyzed for 52 elements using a sodium peroxide fusion by ICP-MS using ALS method ME-MS89L. Samples returning >500ppm Li were also assayed using a 0.2g subsample dissolved in a sodium peroxide solution and analyzed for lithium according to ALS method Li-ICP81. Lithium results are reported by the lab as % Li and have been multiplied by 2.153 to convert to % Li2O.

Results passed QA/QC screening at ALS. No standards or blanks were included in the sample batch by the Company.